Homec4science
Diffusion lammps (master) Browse

lammps/doc/src/dihedral_harmonic.txt
76fb4e08152fmaster

Last Change
Raw File

dihedral_harmonic.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
dihedral_style harmonic command :h3
dihedral_style harmonic/intel command :h3
dihedral_style harmonic/omp command :h3
[Syntax:]
dihedral_style harmonic :pre
[Examples:]
dihedral_style harmonic
dihedral_coeff 1 80.0 1 2 :pre
[Description:]
The {harmonic} dihedral style uses the potential
:c,image(Eqs/dihedral_harmonic.jpg)
The following coefficients must be defined for each dihedral type via the
"dihedral_coeff"_dihedral_coeff.html command as in the example above, or in
the data file or restart files read by the "read_data"_read_data.html
or "read_restart"_read_restart.html commands:
K (energy)
d (+1 or -1)
n (integer >= 0) :ul
NOTE: Here are important points to take note of when defining LAMMPS
dihedral coefficients for the harmonic style, so that they are
compatible with how harmonic dihedrals are defined by other force
fields:
The LAMMPS convention is that the trans position = 180 degrees, while
in some force fields trans = 0 degrees. :ulb,l
Some force fields reverse the sign convention on {d}. :l
Some force fields let {n} be positive or negative which corresponds to
{d} = 1 or -1 for the harmonic style. :l
:ule
:line
Styles with a {gpu}, {intel}, {kk}, {omp}, or {opt} suffix are
functionally the same as the corresponding style without the suffix.
They have been optimized to run faster, depending on your available
hardware, as discussed in "Section 5"_Section_accelerate.html
of the manual. The accelerated styles take the same arguments and
should produce the same results, except for round-off and precision
issues.
These accelerated styles are part of the GPU, USER-INTEL, KOKKOS,
USER-OMP and OPT packages, respectively. They are only enabled if
LAMMPS was built with those packages. See the "Making
LAMMPS"_Section_start.html#start_3 section for more info.
You can specify the accelerated styles explicitly in your input script
by including their suffix, or you can use the "-suffix command-line
switch"_Section_start.html#start_6 when you invoke LAMMPS, or you can
use the "suffix"_suffix.html command in your input script.
See "Section 5"_Section_accelerate.html of the manual for
more instructions on how to use the accelerated styles effectively.
:line
[Restrictions:]
This dihedral style can only be used if LAMMPS was built with the
MOLECULE package. See the "Making
LAMMPS"_Section_start.html#start_3 section for more info on packages.
[Related commands:]
"dihedral_coeff"_dihedral_coeff.html
[Default:] none
c4science · Help