Homec4science
Diffusion lammps (master) Browse

lammps/doc/src/pair_dpd.txt
cf24dd026520master

Last Change
Raw File

pair_dpd.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
pair_style dpd command :h3
pair_style dpd/gpu command :h3
pair_style dpd/intel command :h3
pair_style dpd/omp command :h3
pair_style dpd/tstat command :h3
pair_style dpd/tstat/gpu command :h3
pair_style dpd/tstat/omp command :h3
[Syntax:]
pair_style dpd T cutoff seed
pair_style dpd/tstat Tstart Tstop cutoff seed :pre
T = temperature (temperature units)
Tstart,Tstop = desired temperature at start/end of run (temperature units)
cutoff = global cutoff for DPD interactions (distance units)
seed = random # seed (positive integer) :ul
[Examples:]
pair_style dpd 1.0 2.5 34387
pair_coeff * * 3.0 1.0
pair_coeff 1 1 3.0 1.0 1.0 :pre
pair_style dpd/tstat 1.0 1.0 2.5 34387
pair_coeff * * 1.0
pair_coeff 1 1 1.0 1.0 :pre
[Description:]
Style {dpd} computes a force field for dissipative particle dynamics
(DPD) following the exposition in "(Groot)"_#Groot1.
Style {dpd/tstat} invokes a DPD thermostat on pairwise interactions,
which is equivalent to the non-conservative portion of the DPD force
field. This pair-wise thermostat can be used in conjunction with any
"pair style"_pair_style.html, and in leiu of per-particle thermostats
like "fix langevin"_fix_langevin.html or ensemble thermostats like
Nose Hoover as implemented by "fix nvt"_fix_nh.html. To use
{dpd/tstat} as a thermostat for another pair style, use the "pair_style
hybrid/overlay"_pair_hybrid.html command to compute both the desired
pair interaction and the thermostat for each pair of particles.
For style {dpd}, the force on atom I due to atom J is given as a sum
of 3 terms
:c,image(Eqs/pair_dpd.jpg)
where Fc is a conservative force, Fd is a dissipative force, and Fr is
a random force. Rij is a unit vector in the direction Ri - Rj, Vij is
the vector difference in velocities of the two atoms = Vi - Vj, alpha
is a Gaussian random number with zero mean and unit variance, dt is
the timestep size, and w(r) is a weighting factor that varies between
0 and 1. Rc is the cutoff. Sigma is set equal to sqrt(2 Kb T gamma),
where Kb is the Boltzmann constant and T is the temperature parameter
in the pair_style command.
For style {dpd/tstat}, the force on atom I due to atom J is the same
as the above equation, except that the conservative Fc term is
dropped. Also, during the run, T is set each timestep to a ramped
value from Tstart to Tstop.
For style {dpd}, the pairwise energy associated with style {dpd} is
only due to the conservative force term Fc, and is shifted to be zero
at the cutoff distance Rc. The pairwise virial is calculated using
all 3 terms. For style {dpd/tstat} there is no pairwise energy, but
the last two terms of the formula make a contribution to the virial.
For style {dpd}, the following coefficients must be defined for each
pair of atoms types via the "pair_coeff"_pair_coeff.html command as in
the examples above, or in the data file or restart files read by the
"read_data"_read_data.html or "read_restart"_read_restart.html
commands:
A (force units)
gamma (force/velocity units)
cutoff (distance units) :ul
The last coefficient is optional. If not specified, the global DPD
cutoff is used. Note that sigma is set equal to sqrt(2 T gamma),
where T is the temperature set by the "pair_style"_pair_style.html
command so it does not need to be specified.
For style {dpd/tstat}, the coefficients defined for each pair of
atoms types via the "pair_coeff"_pair_coeff.html command is the same,
except that A is not included.
The GPU-accelerated versions of these styles are implemented based on
the work of "(Afshar)"_#Afshar and "(Phillips)"_#Phillips.
NOTE: If you are modeling DPD polymer chains, you may want to use the
"pair_style srp"_pair_srp.html command in conjuction with these pair
styles. It is a soft segmental repulsive potential (SRP) that can
prevent DPD polymer chains from crossing each other.
NOTE: The virial calculation for pressure when using this pair style
includes all the components of force listed above, including the
random force.
:line
Styles with a {gpu}, {intel}, {kk}, {omp}, or {opt} suffix are
functionally the same as the corresponding style without the suffix.
They have been optimized to run faster, depending on your available
hardware, as discussed in "Section 5"_Section_accelerate.html
of the manual. The accelerated styles take the same arguments and
should produce the same results, except for round-off and precision
issues.
These accelerated styles are part of the GPU, USER-INTEL, KOKKOS,
USER-OMP and OPT packages, respectively. They are only enabled if
LAMMPS was built with those packages. See the "Making
LAMMPS"_Section_start.html#start_3 section for more info.
You can specify the accelerated styles explicitly in your input script
by including their suffix, or you can use the "-suffix command-line
switch"_Section_start.html#start_6 when you invoke LAMMPS, or you can
use the "suffix"_suffix.html command in your input script.
See "Section 5"_Section_accelerate.html of the manual for
more instructions on how to use the accelerated styles effectively.
:line
[Mixing, shift, table, tail correction, restart, rRESPA info]:
These pair styles do not support mixing. Thus, coefficients for all
I,J pairs must be specified explicitly.
These pair styles do not support the "pair_modify"_pair_modify.html
shift option for the energy of the pair interaction. Note that as
discussed above, the energy due to the conservative Fc term is already
shifted to be 0.0 at the cutoff distance Rc.
The "pair_modify"_pair_modify.html table option is not relevant
for these pair styles.
These pair style do not support the "pair_modify"_pair_modify.html
tail option for adding long-range tail corrections to energy and
pressure.
These pair styles writes their information to "binary restart
files"_restart.html, so pair_style and pair_coeff commands do not need
to be specified in an input script that reads a restart file. Note
that the user-specified random number seed is stored in the restart
file, so when a simulation is restarted, each processor will
re-initialize its random number generator the same way it did
initially. This means the random forces will be random, but will not
be the same as they would have been if the original simulation had
continued past the restart time.
These pair styles can only be used via the {pair} keyword of the
"run_style respa"_run_style.html command. They do not support the
{inner}, {middle}, {outer} keywords.
The {dpd/tstat} style can ramp its target temperature over multiple
runs, using the {start} and {stop} keywords of the "run"_run.html
command. See the "run"_run.html command for details of how to do
this.
:line
[Restrictions:]
The default frequency for rebuilding neighbor lists is every 10 steps
(see the "neigh_modify"_neigh_modify.html command). This may be too
infrequent for style {dpd} simulations since particles move rapidly
and can overlap by large amounts. If this setting yields a non-zero
number of "dangerous" reneighborings (printed at the end of a
simulation), you should experiment with forcing reneighboring more
often and see if system energies/trajectories change.
These pair styles requires you to use the "comm_modify vel
yes"_comm_modify.html command so that velocites are stored by ghost
atoms.
These pair styles will not restart exactly when using the
"read_restart"_read_restart.html command, though they should provide
statistically similar results. This is because the forces they
compute depend on atom velocities. See the
"read_restart"_read_restart.html command for more details.
[Related commands:]
"pair_coeff"_pair_coeff.html, "fix nvt"_fix_nh.html, "fix
langevin"_fix_langevin.html, "pair_style srp"_pair_srp.html
[Default:] none
:line
:link(Groot1)
[(Groot)] Groot and Warren, J Chem Phys, 107, 4423-35 (1997).
:link(Afshar)
[(Afshar)] Afshar, F. Schmid, A. Pishevar, S. Worley, Comput Phys
Comm, 184, 1119-1128 (2013).
:link(Phillips)
[(Phillips)] C. L. Phillips, J. A. Anderson, S. C. Glotzer, Comput
Phys Comm, 230, 7191-7201 (2011).
c4science · Help