Homec4science
Diffusion lammps (master) Browse

lammps/doc/src/pair_tersoff_mod.txt
a92d79253734master

Last Change
Raw File

pair_tersoff_mod.txt
View Options

"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c
:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)
:line
pair_style tersoff/mod command :h3
pair_style tersoff/mod/c command :h3
pair_style tersoff/mod/gpu command :h3
pair_style tersoff/mod/kk command :h3
pair_style tersoff/mod/omp command :h3
pair_style tersoff/mod/c/omp command :h3
[Syntax:]
pair_style tersoff/mod :pre
pair_style tersoff/mod/c :pre
[Examples:]
pair_style tersoff/mod
pair_coeff * * Si.tersoff.mod Si Si :pre
pair_style tersoff/mod/c
pair_coeff * * Si.tersoff.modc Si Si :pre
[Description:]
The {tersoff/mod} and {tersoff/mod/c} styles computes a bond-order type
interatomic potential "(Kumagai)"_#Kumagai based on a 3-body Tersoff
potential "(Tersoff_1)"_#Tersoff_12, "(Tersoff_2)"_#Tersoff_22 with
modified cutoff function and angular-dependent term, giving the energy
E of a system of atoms as
:c,image(Eqs/pair_tersoff_mod.jpg)
where f_R is a two-body term and f_A includes three-body interactions.
The summations in the formula are over all neighbors J and K of atom I
within a cutoff distance = R + D.
The {tersoff/mod/c} style differs from {tersoff/mod} only in the
formulation of the V_ij term, where it contains an additional c0 term.
:c,image(Eqs/pair_tersoff_mod_c.jpg)
The modified cutoff function f_C proposed by "(Murty)"_#Murty and
having a continuous second-order differential is employed. The
angular-dependent term g(theta) was modified to increase the
flexibility of the potential.
The {tersoff/mod} potential is fitted to both the elastic constants
and melting point by employing the modified Tersoff potential function
form in which the angular-dependent term is improved. The model
performs extremely well in describing the crystalline, liquid, and
amorphous phases "(Schelling)"_#Schelling.
Only a single pair_coeff command is used with the {tersoff/mod} style
which specifies a Tersoff/MOD potential file with parameters for all
needed elements. These are mapped to LAMMPS atom types by specifying
N additional arguments after the filename in the pair_coeff command,
where N is the number of LAMMPS atom types:
filename
N element names = mapping of Tersoff/MOD elements to atom types :ul
As an example, imagine the Si.tersoff_mod file has Tersoff values for Si.
If your LAMMPS simulation has 3 Si atoms types, you would use the following
pair_coeff command:
pair_coeff * * Si.tersoff_mod Si Si Si :pre
The 1st 2 arguments must be * * so as to span all LAMMPS atom types.
The three Si arguments map LAMMPS atom types 1,2,3 to the Si element
in the Tersoff/MOD file. If a mapping value is specified as NULL, the
mapping is not performed. This can be used when a {tersoff/mod}
potential is used as part of the {hybrid} pair style. The NULL values
are placeholders for atom types that will be used with other
potentials.
Tersoff/MOD file in the {potentials} directory of the LAMMPS
distribution have a ".tersoff.mod" suffix. Potential files for the
{tersoff/mod/c} style have the suffix ".tersoff.modc". Lines that are
not blank or comments (starting with #) define parameters for a triplet
of elements. The parameters in a single entry correspond to
coefficients in the formulae above:
element 1 (the center atom in a 3-body interaction)
element 2 (the atom bonded to the center atom)
element 3 (the atom influencing the 1-2 bond in a bond-order sense)
beta
alpha
h
eta
beta_ters = 1 (dummy parameter)
lambda2 (1/distance units)
B (energy units)
R (distance units)
D (distance units)
lambda1 (1/distance units)
A (energy units)
n
c1
c2
c3
c4
c5
c0 (energy units, tersoff/mod/c only):ul
The n, eta, lambda2, B, lambda1, and A parameters are only used for
two-body interactions. The beta, alpha, c1, c2, c3, c4, c5, h
parameters are only used for three-body interactions. The R and D
parameters are used for both two-body and three-body interactions.
The c0 term applies to {tersoff/mod/c} only. The non-annotated
parameters are unitless.
The Tersoff/MOD potential file must contain entries for all the elements
listed in the pair_coeff command. It can also contain entries for
additional elements not being used in a particular simulation; LAMMPS
ignores those entries.
For a single-element simulation, only a single entry is required
(e.g. SiSiSi). As annotated above, the first element in the entry is
the center atom in a three-body interaction and it is bonded to the
2nd atom and the bond is influenced by the 3rd atom. Thus an entry
for SiSiSi means Si bonded to a Si with another Si atom influencing the bond.
:line
Styles with a {gpu}, {intel}, {kk}, {omp}, or {opt} suffix are
functionally the same as the corresponding style without the suffix.
They have been optimized to run faster, depending on your available
hardware, as discussed in "Section 5"_Section_accelerate.html
of the manual. The accelerated styles take the same arguments and
should produce the same results, except for round-off and precision
issues.
These accelerated styles are part of the GPU, USER-INTEL, KOKKOS,
USER-OMP and OPT packages, respectively. They are only enabled if
LAMMPS was built with those packages. See the "Making
LAMMPS"_Section_start.html#start_3 section for more info.
You can specify the accelerated styles explicitly in your input script
by including their suffix, or you can use the "-suffix command-line
switch"_Section_start.html#start_6 when you invoke LAMMPS, or you can
use the "suffix"_suffix.html command in your input script.
See "Section 5"_Section_accelerate.html of the manual for
more instructions on how to use the accelerated styles effectively.
:line
[Mixing, shift, table, tail correction, restart, rRESPA info]:
This pair style does not support the "pair_modify"_pair_modify.html
shift, table, and tail options.
This pair style does not write its information to "binary restart
files"_restart.html, since it is stored in potential files. Thus, you
need to re-specify the pair_style and pair_coeff commands in an input
script that reads a restart file.
This pair style can only be used via the {pair} keyword of the
"run_style respa"_run_style.html command. It does not support the
{inner}, {middle}, {outer} keywords.
:line
[Restrictions:]
This pair style is part of the MANYBODY package. It is only enabled
if LAMMPS was built with that package. See
the "Making LAMMPS"_Section_start.html#start_3 section for more info.
This pair style requires the "newton"_newton.html setting to be "on"
for pair interactions.
The Tersoff/MOD potential files provided with LAMMPS (see the potentials
directory) are parameterized for metal "units"_units.html. You can
use the Tersoff/MOD potential with any LAMMPS units, but you would need to
create your own Tersoff/MOD potential file with coefficients listed in the
appropriate units if your simulation doesn't use "metal" units.
[Related commands:]
"pair_coeff"_pair_coeff.html
[Default:] none
:line
:link(Kumagai)
[(Kumagai)] T. Kumagai, S. Izumi, S. Hara, S. Sakai,
Comp. Mat. Science, 39, 457 (2007).
:link(Tersoff_12)
[(Tersoff_1)] J. Tersoff, Phys Rev B, 37, 6991 (1988).
:link(Tersoff_22)
[(Tersoff_2)] J. Tersoff, Phys Rev B, 38, 9902 (1988).
:link(Murty)
[(Murty)] M.V.R. Murty, H.A. Atwater, Phys Rev B, 51, 4889 (1995).
:link(Schelling)
[(Schelling)] Patrick K. Schelling, Comp. Mat. Science, 44, 274 (2008).
c4science · Help