Homec4science
Diffusion MSM (command_line) Browse

msm/ShoulderModel/TOOLBOX_Ribcage_Ellipsoid/ELLIPSOID_TOOL_main_file.m
85ff112848b3command_line

Last Change
Raw File

ELLIPSOID_TOOL_main_file.m
View Options

%--------------------------------------------------------------------------
%
%
% GUI FOR RUNNING THE RIBCAGE ELLIPSOID TOOL
%--------------------------------------------------------------------------
%
% File Description :
% This file creates the main GUI for running the ribcage ellipsoid
% optimisation tool. The tool allows you to select the points on the
% ribcage the ellipsoid is to pass through by imposing bounds the
% coordinates. The optimisation cost function is the sum of the norms
% between points on the ribcage mesh and their projection onto the
% ellipsoid surface.
%
%--------------------------------------------------------------------------
%
% File Structure :
% The GUI figure is created in EHandle. The pushbuttons are defined next,
% followed by the initialisation script. All the GUI control structures are
% contained in EGUIHandle. The axis is called EllipseVisualisationAxes.
% All the graphics are contained in a single strucure : EPlotHandles.
%
%--------------------------------------------------------------------------
%
% Contents of the Interactive GUI structure :
% PushButton Section
% EGUIHandle.Close_Button
% EGUIHandle.Build_Ellipsoid_Button
% EGUIHandle.View_Ellipsoid_Button
% EGUIHandle.Save_Visualisation_Button
%
% Ribcage point selection tools
% EGUIHandle.RibCage_Selection.Title
% EGUIHandle.RibCage_Selection.XText
% EGUIHandle.RibCage_Selection.Xmin
% EGUIHandle.RibCage_Selection.Xmax
% EGUIHandle.RibCage_Selection.YText
% EGUIHandle.RibCage_Selection.Ymin
% EGUIHandle.RibCage_Selection.Ymax
% EGUIHandle.RibCage_Selection.ZText
% EGUIHandle.RibCage_Selection.Zmin
% EGUIHandle.RibCage_Selection.Zmax
%
% Optimisation initial value parameters
% EGUIHandle.Optimisation_Parameters.Title
% EGUIHandle.Optimisation_Parameters.Subtitle
% EGUIHandle.Optimisation_Parameters.CentreXt
% EGUIHandle.Optimisation_Parameters.CentreXLbv
% EGUIHandle.Optimisation_Parameters.CentreXov
% EGUIHandle.Optimisation_Parameters.CentreXUbv
% EGUIHandle.Optimisation_Parameters.CentreYt
% EGUIHandle.Optimisation_Parameters.CentreYLbv
% EGUIHandle.Optimisation_Parameters.CentreYov
% EGUIHandle.Optimisation_Parameters.CentreYUbv
% EGUIHandle.Optimisation_Parameters.CentreZt
% EGUIHandle.Optimisation_Parameters.CentreZLbv
% EGUIHandle.Optimisation_Parameters.CentreZov
% EGUIHandle.Optimisation_Parameters.CentreZUbv
% EGUIHandle.Optimisation_Parameters.AxisXt
% EGUIHandle.Optimisation_Parameters.AxisXLbv
% EGUIHandle.Optimisation_Parameters.AxisXov
% EGUIHandle.Optimisation_Parameters.AxisXUbv
% EGUIHandle.Optimisation_Parameters.AxisYt
% EGUIHandle.Optimisation_Parameters.AxisYLbv
% EGUIHandle.Optimisation_Parameters.AxisYov
% EGUIHandle.Optimisation_Parameters.AxisYUbv
% EGUIHandle.Optimisation_Parameters.AxisZt
% EGUIHandle.Optimisation_Parameters.AxisZLbv
% EGUIHandle.Optimisation_Parameters.AxisZov
% EGUIHandle.Optimisation_Parameters.AxisZUbv
%
% Optimisation Solver parameters
% EGUIHandle.Optimisation_Setup.AlgorithmTxt
% EGUIHandle.Optimisation_Setup.AlgorithmSelect
% EGUIHandle.Optimisation_Setup.ToleranceTxt
% EGUIHandle.Optimisation_Setup.TolXSelect
% EGUIHandle.Optimisation_Setup.TolFunSelect
% EGUIHandle.Optimisation_Setup.TolConSelect
% EGUIHandle.Optimisation_Setup.MaxIterationsTxt
% EGUIHandle.Optimisation_Setup.MaxIterSelect
% EGUIHandle.Optimisation_Setup.MaxFunEvalSelect
%--------------------------------------------------------------------------
%
% The graphical hierarchy is :
% EHandle
% -> EllipseVisualisationAxes
% -> EPlotHandles
%
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% CREATE THE FIGURE
%--------------------------------------------------------------------------
EHandle = figure(...
'color', 'white',...
'units', 'normalized',...
'position', [0.1, 0.1, 0.4, 0.8],...
'toolbar', 'figure',...
'name', 'EPFL - LBO SHOULDER MODEL: RIBCAGE ELLIPSOID TOOLBOX');
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% CREATE PUSHBUTTONS
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% Push Button for Closing the GUI
EGUIHandle.Close_Button = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.95, 0.3, 0.05],...
'style', 'pushbutton',...
'string', '<html> <b>- CLOSE TOOL -------------------------------------</b><br><p style="font-size: 90%;"> <i> Closes the ellipsoid tool and returns to main GUI</i></p>',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Close Ellipsoid Tool'));
% Push Button for Visualising the Ellipsoid
EGUIHandle.Save_Visualisation_Button = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.9, 0.3, 0.05],...
'style', 'pushbutton',...
'string', '<html> <b>- SAVE VISUALISATION ---------------------------</b><br><p style="font-size: 90%;"> <i> Saves the current visualisation to en .eps file</i></p>',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Save Visualisation'));
% Push Button for Constructing the Ellipsoid
EGUIHandle.Build_Ellipsoid_Button = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.85, 0.3, 0.05],...
'style', 'pushbutton',...
'string', '<html> <b>- BUILD ELLIPSOID -------------------------------</b><br><p style="font-size: 90%;"> <i> Runs the optimisation routine</i></p>',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Build Ellipsoid'));
% Push Button for Visualising the Ellipsoid
EGUIHandle.Update_Visualisation_Button = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.53, 0.3, 0.05],...
'style', 'pushbutton',...
'string', '<html> <b>- UPDATE VISUALISATION -----------------------</b><br><p style="font-size: 90%;"> <i> Updates the visualisation given the selected options above</i></p>',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Update Visualisation'));
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% CREATE RADIO BUTTONS
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% Radio Button for Visualising the Points
EGUIHandle.Points_Radio_Button = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.65, 0.3, 0.02],...
'style', 'radiobutton',...
'string', 'View Ribcage Points',...
'value', 1,...
'fontsize', 14,...
'backgroundcolor', 'white',...
'fontweight', 'bold');
% Radio Button for Visualising the Ellipsoid
EGUIHandle.Ellipsoid_Radio_Button = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.61, 0.3, 0.02],...
'style', 'radiobutton',...
'string', 'View Ellipsoid',...
'value', 0,...
'fontsize', 14,...
'backgroundcolor', 'white',...
'fontweight', 'bold');
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% CREATE THE RIBCAGE INTERACTION ELEMENTS
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% Title
EGUIHandle.RibCage_Selection.Title = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.82, 0.3, 0.02],...
'style', 'text',...
'string', 'Bounds For Selected Ribcage Points',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold');
%--------------------------------------------------------------------------
% RIBCAGE X LIMIT POINTS
%--------------------------------------------------------------------------
% Xmin Title
EGUIHandle.RibCage_Selection.XminText = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.79, 0.07, 0.02],...
'style', 'text',...
'string', 'Xmin',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold');
% Minimum Value
EGUIHandle.RibCage_Selection.Xmin = uicontrol(...
'units', 'normalized',...
'position', [0.77, 0.78, 0.05, 0.04],...
'style', 'edit',...
'string', '50',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Update Ribcage Points'));
% Xmax Title
EGUIHandle.RibCage_Selection.XmaxText = uicontrol(...
'units', 'normalized',...
'position', [0.82, 0.78, 0.07, 0.02],...
'style', 'text',...
'string', 'Xmax',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold');
% Maximum Value
EGUIHandle.RibCage_Selection.Xmax = uicontrol(...
'units', 'normalized',...
'position', [0.89, 0.78, 0.05, 0.04],...
'style', 'edit',...
'string', '200',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Update Ribcage Points'));
%--------------------------------------------------------------------------
% RIBCAGE Y LIMIT POINTS
%--------------------------------------------------------------------------
% Ymin Title
EGUIHandle.RibCage_Selection.YminText = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.75, 0.07, 0.02],...
'style', 'text',...
'string', 'Ymin',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold');
% Minimum Value
EGUIHandle.RibCage_Selection.Ymin = uicontrol(...
'units', 'normalized',...
'position', [0.77, 0.74, 0.05, 0.04],...
'style', 'edit',...
'string', '-120',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Update Ribcage Points'));
% Ymax Title
EGUIHandle.RibCage_Selection.YmaxText = uicontrol(...
'units', 'normalized',...
'position', [0.82, 0.75, 0.07, 0.02],...
'style', 'text',...
'string', 'Ymax',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold');
% Maximum Value
EGUIHandle.RibCage_Selection.Ymax = uicontrol(...
'units', 'normalized',...
'position', [0.89, 0.74, 0.05, 0.04],...
'style', 'edit',...
'string', '-60',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Update Ribcage Points'));
%--------------------------------------------------------------------------
% RIBCAGE Z LIMIT POINTS
%--------------------------------------------------------------------------
% Zmin Title
EGUIHandle.RibCage_Selection.ZminText = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.71, 0.07, 0.02],...
'style', 'text',...
'string', 'Zmin',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold');
% Minimum Value
EGUIHandle.RibCage_Selection.Zmin = uicontrol(...
'units', 'normalized',...
'position', [0.77, 0.7, 0.05, 0.04],...
'style', 'edit',...
'string', '-100',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Update Ribcage Points'));
% Zmax Title
EGUIHandle.RibCage_Selection.ZminText = uicontrol(...
'units', 'normalized',...
'position', [0.82, 0.71, 0.07, 0.02],...
'style', 'text',...
'string', 'Zmin',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold');
% Maximum Value
EGUIHandle.RibCage_Selection.Zmax = uicontrol(...
'units', 'normalized',...
'position', [0.89, 0.7, 0.05, 0.04],...
'style', 'edit',...
'string', '50',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Update Ribcage Points'));
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% CREATE OPTIMISATION PARAMETERS
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Parameters.Title = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.5, 0.3, 0.02],...
'style', 'text',...
'string', 'Optimisation Parameters',...
'backgroundcolor', 'white',...
'fontsize', 14,...
'fontweight', 'bold');
% Subtitle
EGUIHandle.Optimisation_Parameters.Subtitle = uicontrol(...
'units', 'normalized',...
'position', [0.8, 0.48, 0.2, 0.02],...
'style', 'text',...
'string', 'Lb Xo Ub',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
%--------------------------------------------------------------------------
% ELLIPSOID CENTRE X COORDINATE
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Parameters.CentreXt = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.44, 0.1, 0.02],...
'style', 'text',...
'string', 'Centre X',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
% Lower Bound
EGUIHandle.Optimisation_Parameters.CentreXLbv = uicontrol(...
'units', 'normalized',...
'position', [0.8, 0.44, 0.05, 0.04],...
'style', 'edit',...
'string', '-50',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Initial Value
EGUIHandle.Optimisation_Parameters.CentreXov = uicontrol(...
'units', 'normalized',...
'position', [0.875, 0.44, 0.05, 0.04],...
'style', 'edit',...
'string', '0',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Upper Bound
EGUIHandle.Optimisation_Parameters.CentreXUbv = uicontrol(...
'units', 'normalized',...
'position', [0.95, 0.44, 0.05, 0.04],...
'style', 'edit',...
'string', '50',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
%--------------------------------------------------------------------------
% ELLIPSOID CENTRE Y COORDINATE
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Parameters.CentreYt = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.4, 0.1, 0.02],...
'style', 'text',...
'string', 'Centre Y',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
% Lower Bound
EGUIHandle.Optimisation_Parameters.CentreYLbv = uicontrol(...
'units', 'normalized',...
'position', [0.8, 0.4, 0.05, 0.04],...
'style', 'edit',...
'string', '-100',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Initial Value
EGUIHandle.Optimisation_Parameters.CentreYov = uicontrol(...
'units', 'normalized',...
'position', [0.875, 0.4, 0.05, 0.04],...
'style', 'edit',...
'string', '-50',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Upper Bound
EGUIHandle.Optimisation_Parameters.CentreYUbv = uicontrol(...
'units', 'normalized',...
'position', [0.95, 0.4, 0.05, 0.04],...
'style', 'edit',...
'string', '100',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
%--------------------------------------------------------------------------
% ELLIPSOID CENTRE Z COORDINATE
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Parameters.CentreZt = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.36, 0.1, 0.02],...
'style', 'text',...
'string', 'Centre Z',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
% Lower Bound
EGUIHandle.Optimisation_Parameters.CentreZLbv = uicontrol(...
'units', 'normalized',...
'position', [0.8, 0.36, 0.05, 0.04],...
'style', 'edit',...
'string', '-400',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Initial Value
EGUIHandle.Optimisation_Parameters.CentreZov = uicontrol(...
'units', 'normalized',...
'position', [0.875, 0.36, 0.05, 0.04],...
'style', 'edit',...
'string', '-200',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Upper Bound
EGUIHandle.Optimisation_Parameters.CentreZUbv = uicontrol(...
'units', 'normalized',...
'position', [0.95, 0.36, 0.05, 0.04],...
'style', 'edit',...
'string', '400',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
%--------------------------------------------------------------------------
% ELLIPSOID HALF-AXIS X COORDINATE
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Parameters.AxisXt = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.32, 0.1, 0.02],...
'style', 'text',...
'string', 'Axis X',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
% Lower Bound
EGUIHandle.Optimisation_Parameters.AxisXLbv = uicontrol(...
'units', 'normalized',...
'position', [0.8, 0.32, 0.05, 0.04],...
'style', 'edit',...
'string', '10',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Initial Value
EGUIHandle.Optimisation_Parameters.AxisXov = uicontrol(...
'units', 'normalized',...
'position', [0.875, 0.32, 0.05, 0.04],...
'style', 'edit',...
'string', '200',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Upper Bound
EGUIHandle.Optimisation_Parameters.AxisXUbv = uicontrol(...
'units', 'normalized',...
'position', [0.95, 0.32, 0.05, 0.04],...
'style', 'edit',...
'string', '400',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
%--------------------------------------------------------------------------
% ELLIPSOID HALF-AXIS Y COORDINATE
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Parameters.AxisYt = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.28, 0.1, 0.02],...
'style', 'text',...
'string', 'Axis X',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
% Lower Bound
EGUIHandle.Optimisation_Parameters.AxisYLbv = uicontrol(...
'units', 'normalized',...
'position', [0.8, 0.28, 0.05, 0.04],...
'style', 'edit',...
'string', '10',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Initial Value
EGUIHandle.Optimisation_Parameters.AxisYov = uicontrol(...
'units', 'normalized',...
'position', [0.875, 0.28, 0.05, 0.04],...
'style', 'edit',...
'string', '100',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Upper Bound
EGUIHandle.Optimisation_Parameters.AxisYUbv = uicontrol(...
'units', 'normalized',...
'position', [0.95, 0.28, 0.05, 0.04],...
'style', 'edit',...
'string', '400',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
%--------------------------------------------------------------------------
% ELLIPSOID HALF-AXIS Z COORDINATE
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Parameters.AxisZt = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.24, 0.1, 0.02],...
'style', 'text',...
'string', 'Axis Z',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
% Lower Bound
EGUIHandle.Optimisation_Parameters.AxisZLbv = uicontrol(...
'units', 'normalized',...
'position', [0.8, 0.24, 0.05, 0.04],...
'style', 'edit',...
'string', '10',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Initial Value
EGUIHandle.Optimisation_Parameters.AxisZov = uicontrol(...
'units', 'normalized',...
'position', [0.875, 0.24, 0.05, 0.04],...
'style', 'edit',...
'string', '300',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
% Upper Bound
EGUIHandle.Optimisation_Parameters.AxisZUbv = uicontrol(...
'units', 'normalized',...
'position', [0.95, 0.24, 0.05, 0.04],...
'style', 'edit',...
'string', '400',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Parameters'));
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% CREATE OPTIMISATION PARAMETERS SETUP
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% ALGORITHMS
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Setup.AlgorithmTxt = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.2, 0.3, 0.02],...
'style', 'text',...
'string', 'Algorithm',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
% Selection Values
EGUIHandle.Optimisation_Setup.AlgorithmSelect = uicontrol(...
'units', 'normalized',...
'position', [0.8, 0.15, 0.2, 0.045],...
'style', 'listbox',...
'string', {'sqp', 'trust-region-reflective', 'interior-point', 'active-set'},...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Settings'));
%--------------------------------------------------------------------------
% TOLERANCES
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Setup.ToleranceTxt = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.13, 0.3, 0.02],...
'style', 'text',...
'string', 'Tolerances (X, Function, Constraints)',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
% Selection Values
EGUIHandle.Optimisation_Setup.TolXSelect = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.08, 0.1, 0.045],...
'style', 'listbox',...
'string', {'1.e-3', '1.e-4', '1.e-5', '1.e-6', '1.e-7', '1.e-8'},...
'value', 4,...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Settings'));
% Selection Values
EGUIHandle.Optimisation_Setup.TolFunSelect = uicontrol(...
'units', 'normalized',...
'position', [0.8, 0.08, 0.1, 0.045],...
'style', 'listbox',...
'string', {'1.e-3', '1.e-4', '1.e-5', '1.e-6', '1.e-7', '1.e-8'},...
'value', 4,...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Settings'));
% Selection Values
EGUIHandle.Optimisation_Setup.TolConSelect = uicontrol(...
'units', 'normalized',...
'position', [0.9, 0.08, 0.1, 0.045],...
'style', 'listbox',...
'string', {'1.e-3', '1.e-4', '1.e-5', '1.e-6', '1.e-7', '1.e-8'},...
'value', 4,...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Settings'));
%--------------------------------------------------------------------------
% MAXIMUM FUNCTION EVALUATIONS & ITERATIONS
%--------------------------------------------------------------------------
% Title
EGUIHandle.Optimisation_Setup.MaxIterationsTxt = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.06, 0.3, 0.02],...
'style', 'text',...
'string', 'Maximum Nb. of Iterations & Function Evaluations',...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold');
% Selection Values
EGUIHandle.Optimisation_Setup.MaxIterSelect = uicontrol(...
'units', 'normalized',...
'position', [0.7, 0.02, 0.15, 0.035],...
'style', 'listbox',...
'string', {'1.e2', '1.e3', '1.e4'},...
'value', 2,...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Settings'));
% Selection Values
EGUIHandle.Optimisation_Setup.MaxFunEvalSelect = uicontrol(...
'units', 'normalized',...
'position', [0.85, 0.02, 0.15, 0.035],...
'style', 'listbox',...
'string', {'1.e2', '1.e3', '1.e4'},...
'value', 2,...
'backgroundcolor', 'white',...
'fontsize', 12,...
'fontweight', 'bold',...
'callback', ELLIPSOID_TOOL_script_generator('Set Optimisation Settings'));
% Create the Help Menu
EGUIHandle.HelpMenu(1,1) = uimenu(EHandle,...
'label', 'GUI Help');
EGUIHandle.HelpMenu(2,1) = uimenu(EGUIHandle.HelpMenu(1,1),...
'label', 'About?',...
'callback', ELLIPSOID_TOOL_script_generator('Help'));
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% INITIALISE THE OPTIMISATION DATA STRUCTURE
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% Create the Data Structure
EOPTDATA.points = [];
EOPTDATA.Initial_Guess = [0, -50, -200, 200, 100, 300];
EOPTDATA.Lower_Bounds = [-50, -100, -400, 10, 10, 10];
EOPTDATA.Upper_Bounds = [50, 100, 400, 400, 400, 400];
EOPTDATA.Algorithm = 'sqp';
EOPTDATA.TolX = 1.e-6;
EOPTDATA.TolFun = 1.e-6;
EOPTDATA.TolCon = 1.e-6;
EOPTDATA.MaxFunEval = 1.e3;
EOPTDATA.MaxIter = 1.e3;
% Give it the List of Points
points = [];
for i = 1:size(MEDATA.Thorax_Mesh.points,1)
Xmax = str2double(get(EGUIHandle.RibCage_Selection.Xmax, 'string'));
Ymax = str2double(get(EGUIHandle.RibCage_Selection.Ymax, 'string'));
Zmax = str2double(get(EGUIHandle.RibCage_Selection.Zmax, 'string'));
Xmin = str2double(get(EGUIHandle.RibCage_Selection.Xmin, 'string'));
Ymin = str2double(get(EGUIHandle.RibCage_Selection.Ymin, 'string'));
Zmin = str2double(get(EGUIHandle.RibCage_Selection.Zmin, 'string'));
% Select an initial set of points
if MEDATA.Thorax_Mesh.points(i,1) > Xmin && MEDATA.Thorax_Mesh.points(i,1) < Xmax
if MEDATA.Thorax_Mesh.points(i,2) > Ymin && MEDATA.Thorax_Mesh.points(i,2) < Ymax
if MEDATA.Thorax_Mesh.points(i,3) > Zmin && MEDATA.Thorax_Mesh.points(i,3) < Zmax
points = [points; [MEDATA.Thorax_Mesh.points(i,:)]];
end
end
end
end
EOPTDATA.points = points; clear points;
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% INITIALISATION OF THE VISUALISATION
%--------------------------------------------------------------------------
%--------------------------------------------------------------------------
% Create the Axes
EllipseVisualisationAxes = axes(...
'units', 'normalized',...
'position', [0.1, 0.05, 0.6, 0.9]);
% Set the Axis
set(EHandle, 'currentaxes', EllipseVisualisationAxes); hold on;
% Create the 3-D Meshing Visualisations
EPlotHandles.MeshHandle(1) = VISUALISATION_view_bone_meshing([], MEDATA, 0, BLDATA);
EPlotHandles.MeshHandle(2) = VISUALISATION_view_bone_meshing([], MEDATA, 1, BLDATA);
EPlotHandles.MeshHandle(3) = VISUALISATION_view_bone_meshing([], MEDATA, 2, BLDATA);
EPlotHandles.MeshHandle(4) = VISUALISATION_view_bone_meshing([], MEDATA, 3, BLDATA);
EPlotHandles.MeshHandle(5) = VISUALISATION_view_bone_meshing([], MEDATA, 4, BLDATA);
EPlotHandles.MeshHandle(6) = VISUALISATION_view_bone_meshing([], MEDATA, 5, BLDATA);
EPlotHandles.MeshHandle(7) = VISUALISATION_view_bone_meshing([], MEDATA, 6, BLDATA);
% Create the 3-D Wire Frame Visualisations
EPlotHandles.WireFrameHandle(1) = VISUALISATION_view_bone_wireframe([], 0, BLDATA);
EPlotHandles.WireFrameHandle(2) = VISUALISATION_view_bone_wireframe([], 1, BLDATA);
EPlotHandles.WireFrameHandle(3) = VISUALISATION_view_bone_wireframe([], 2, BLDATA);
EPlotHandles.WireFrameHandle(4) = VISUALISATION_view_bone_wireframe([], 3, BLDATA);
EPlotHandles.WireFrameHandle(5) = VISUALISATION_view_bone_wireframe([], 4, BLDATA);
EPlotHandles.WireFrameHandle(6) = VISUALISATION_view_bone_wireframe([], 5, BLDATA);
% Initialise the ellipsoid plot
EPlotHandles.Ellipsoid = [];
% Visualise the Area to be used
EPlotHandles.RibCage = plot3(EOPTDATA.points(:,1), EOPTDATA.points(:,2), EOPTDATA.points(:,3),...
'linestyle', '--',...
'marker', 'o',...
'color', 'red',...
'markerfacecolor', 'blue',...
'markersize', 6);
%--------------------------------------------------------------------------
% SET THE APPEARANCE OF THE VISUALISATION
%--------------------------------------------------------------------------
% Set some lights to help visualise the model
light('Position',[ 1, 0, 0],'Style','infinite');
light('Position',[ 0, 0, -10],'Style','local');
light('Position',[10, -50, 0],'Style','infinite');
colormap copper; % Give the bone meshings a bone color.
%box on; % Turn the axes box on. It makes is easier to keep track of the orientation.
material dull; % Define the bone meshing material. It removes the shiny effect.
axis equal; % Correct the apsect ratio.
zoom(1); % Zoom in on the visualisation. otherwise it looks very small.
view([45, 25]); % Setup the initial camera postion [0,0] is behind horizontally.
c4science · Help