Homec4science
Diffusion Phabricator (feature/better-testing) Browse

phab/src/docs/user/cluster/cluster_notifications.diviner
bbd5b3a9f692feature/better-testing

Last Change
Raw File

cluster_notifications.diviner
View Options

@title Cluster: Notifications
@group cluster
Configuring Phabricator to use multiple notification servers.
Overview
========
You can run multiple notification servers. The advantages of doing this
are:
- you can completely survive the loss of any subset so long as one
remains standing; and
- performance and capacity may improve.
This configuration is relatively simple, but has a small impact on availability
and does nothing to increase resitance to data loss.
Clustering Design Goals
=======================
Notification clustering aims to restore service automatically after the loss
of some nodes. It does **not** attempt to guarantee that every message is
delivered.
Notification messages provide timely information about events, but they are
never authoritative and never the only way for users to learn about events.
For example, if a notification about a task update is not delivered, the next
page you load will still show the notification in your notification menu.
Generally, Phabricator works fine without notifications configured at all, so
clustering assumes that losing some messages during a disruption is acceptable.
How Clustering Works
====================
Notification clustering is very simple: notification servers relay every
message they receive to a list of peers.
When you configure clustering, you'll run multiple servers and tell them that
the other servers exist. When any server receives a message, it retransmits it
to all the severs it knows about.
When a server is lost, clients will automatically reconnect after a brief
delay. They may lose some notifications while their client is reconnecting,
but normally this should only last for a few seconds.
Configuring Aphlict
===================
To configure clustering on the server side, add a `cluster` key to your
Aphlict configuration file. For more details about configuring Aphlict,
see @{article:Notifications User Guide: Setup and Configuration}.
The `cluster` key should contain a list of `"admin"` server locations. Every
message the server receives will be retransmitted to all nodes in the list.
The server is smart enough to avoid sending messages in a cycle, and to avoid
sending messages to itself. You can safely list every server you run in the
configuration file, including the current server.
You do not need to configure servers in an acyclic graph or only list //other//
servers: just list everything on every server and Aphlict will figure things
out from there.
A simple example with two servers might look like this:
```lang=json, name="aphlict.json (Cluster)"
{
...
"cluster": [
{
"host": "notify001.mycompany.com",
"port": 22281,
"protocol": "http"
},
{
"host": "notify002.mycompany.com",
"port": 22281,
"protocol": "http"
}
]
...
}
```
Configuring Phabricator
=======================
To configure clustering on the client side, add every service you run to
`notification.servers`. Generally, this will be twice as many entries as
you run actual servers, since each server runs a `"client"` service and an
`"admin"` service.
A simple example with the two servers above (providing four total services)
might look like this:
```lang=json, name="notification.servers (Cluster)"
[
{
"type": "client",
"host": "notify001.mycompany.com",
"port": 22280,
"protocol": "https"
},
{
"type": "client",
"host": "notify002.mycompany.com",
"port": 22280,
"protocol": "https"
},
{
"type": "admin",
"host": "notify001.mycompany.com",
"port": 22281,
"protocol": "http"
},
{
"type": "admin",
"host": "notify002.mycompany.com",
"port": 22281,
"protocol": "http"
}
]
```
If you put all of the `"client"` servers behind a load balancer, you would
just list the load balancer and let it handle pulling nodes in and out of
service.
```lang=json, name="notification.servers (Cluster + Load Balancer)"
[
{
"type": "client",
"host": "notify-lb.mycompany.com",
"port": 22280,
"protocol": "https"
},
{
"type": "admin",
"host": "notify001.mycompany.com",
"port": 22281,
"protocol": "http"
},
{
"type": "admin",
"host": "notify002.mycompany.com",
"port": 22281,
"protocol": "http"
}
]
```
Notification hosts do not need to run any additional services, although they
are free to do so. The notification server generally consumes few resources
and is resistant to most other loads on the machine, so it's reasonable to
overlay these on top of other services wherever it is convenient.
Next Steps
==========
Continue by:
- reviewing notification configuration with
@{article:Notifications User Guide: Setup and Configuration}; or
- returning to @{article:Clustering Introduction}.
c4science · Help