Homec4science
Diffusion Phabricator (feature/better-testing) Browse

phab/src/docs/user/userguide/drydock_security.diviner
3f3626c11a04feature/better-testing

Last Change
Raw File

drydock_security.diviner
View Options

@title Drydock User Guide: Security
@group userguide
Understanding security concerns in Drydock.
Overview
========
Different applications use Drydock for different things, and some of the things
they do with Drydock require different levels of trust and access. It is
important to configure Drydock properly so that less trusted code can't do
anything you aren't comfortable with.
For example, running unit tests on Drydock normally involves running relatively
untrusted code (it often has a single author and has not yet been reviewed)
that needs very few capabilities (generally, it only needs to be able to report
results back to Phabricator). In contrast, automating merge requests on Drydock
involves running trusted code that needs more access (it must be able to write
to repositories).
Drydock allows resources to be shared and reused, so it's possible to configure
Drydock in a way that gives untrusted code a lot of access by accident.
One way Drydock makes allocations faster is by sharing, reusing, and recycling
resources. When an application asks Drydock for a working copy, it will try to
satisfy the request by cleaning up a suitable existing working copy if it can,
instead of building a new one. This is faster, but it means that tasks have
some ability to interact or interfere with each other.
Similarly, Drydock may allocate multiple leases on the same host at the same
time, running as the same user. This is generally simpler to configure and less
wasteful than fully isolating leases, but means that they can interact.
Depending on your organization, environment and use cases, you might not want
this, and it may be important that different use cases are unable to interfere
with each other. For example, you might want to prevent unit tests from writing
to repositories.
**Drydock does not guarantee that resources are isolated by default**. When
resources are more isolated, they are usually also harder to configure and
slower to allocate. Because most installs will want to find a balance between
isolation and complexity/performance, Drydock does not make assumptions about
either isolation or performance having absolute priority.
You'll usually want to isolate things just enough that nothing bad can happen.
Fortunately, this is straightforward. This document describes how to make sure
you have enough isolation so that nothing you're uncomfortable with can occur.
Choosing an Isolation Policy
============================
This section provides some reasonable examples of ways you might approach
configuring Drydock.
| Isolation | Suitable For | Description
|-----------|-----|-------
| Zero | Development | Everything on one host.
| Low | Small Installs | Use a dedicated Drydock host.
| High | Most Installs | **Recommended**. Use low-trust and high-trust pools.
| Custom | Special Requirements | Use multiple pools.
| Absolute | Special Requirements | Completely isolate all resources.
**Zero Isolation**: Run Drydock operations on the same host that Phabricator
runs on. This is only suitable for developing or testing Phabricator. Any
Drydock operation can potentially compromise Phabricator. It is intentionally
difficult to configure Drydock to operate in this mode. Running Drydock
operations on the Phabricator host is strongly discouraged.
**Low Isolation**: Designate a separate Drydock host and run Drydock
operations on it. This is suitable for small installs and provides a reasonable
level of isolation. However, it will allow unit tests (which often run
lower-trust code) to interfere with repository automation operations.
**High Isolation**: Designate two Drydock host pools and run low-trust
operations (like builds) on one pool and high-trust operations (like repository
automation) on a separate pool. This provides a good balance between isolation
and performance, although tests can still potentially interfere with the
execution of unrelated tests.
**Custom Isolation**: You can continue adding pools to refine the resource
isolation model. For example, you may have higher-trust and lower-trust
repositories or do builds on a mid-trust tier which runs only reviewed code.
**Absolute Isolation**: Configure blueprints to completely initialize and
destroy hosts or containers on every request, and limit all resources to one
simultaneous lease. This will completely isolate every operation, but come at
a high performance and complexity cost.
NOTE: It is not currently possible to configure Drydock in an absolute
isolation mode.
It is usually reasonable to choose one of these approaches as a starting point
and then adjust it to fit your requirements. You can also evolve your use of
Drydock over time as your needs change.
Threat Scenarios
================
This section will help you understand the threats to a Drydock environment.
Not all threats will be concerning to all installs, and you can choose an
approach which defuses only the threats you care about.
Attackers have three primary targets:
- capturing hosts;
- compromising Phabricator; and
- compromising the integrity of other Drydock processes.
**Attacks against hosts** are the least sophisticated. In this scenario, an
attacker wants to run a program like a Bitcoin miner or botnet client on
hardware that they aren't paying for or which can't be traced to them. They
write a "unit test" or which launches this software, then send a revision
containing this "unit test" for review. If Phabricator is configured to
automatically run tests on new revisions, it may execute automatically and give
the attacker access to computing resources they did not previously control and
which can not easily be traced back to them.
This is usually only a meaningful threat for open source installs, because
there is a high probability of eventual detection and the value of these
resources is small, so employees will generally not have an incentive to
attempt this sort of attack. The easiest way to prevent this attack is to
prevent untrusted, anonymous contributors from running tests. For example,
create a "Trusted Contributors" project and only run tests if a revision author
is a member of the project.
**Attacks against Phabricator** are more sophisticated. In this scenario, an
attacker tries to compromise Phabricator itself (for example, to make themselves
an administrator or gain access to an administrator account).
This is made possible if Drydock is running on the same host as Phabricator or
runs on a privileged subnet with access to resources like Phabricator database
hosts. Most installs should be concerned about this attack.
The best way to defuse this attack is to run Drydock processes on a separate
host which is not on a privileged subnet. For example, use a
`build.mycompany.com` host or pool for Drydock processes, separate from your
`phabricator.mycompany.com` host or pool.
Even if the host is not privileged, many Drydock processes have some level of
privilege (enabling them to clone repositories, or report test results back to
Phabricator). Be aware that tests can hijack credentials they are run with,
and potentialy hijack credentials given to other processes on the same hosts.
You should use credentials with a minimum set of privileges and assume all
processes on a host have the highest level of access that any process on the
host has.
**Attacks against Drydock** are the most sophisticated. In this scenario, an
attacker uses one Drydock process to compromise a different process: for
example, a unit test which tampers with a merge or injects code into a build.
This might allow an attacker to make changes to a repository or binary without
going through review or triggering other rules which would normally detect the
change.
These attackers could also make failing tests appear to pass, or break tests or
builds, but these attacks are generally less interesting than tampering with
a repository or binary.
This is a complex attack which you may not have to worry about unless you have
a high degree of process and control in your change pipeline. If users can push
changes directly to repositories, this often represents a faster and easier way
to achieve the same tampering.
The best way to defuse this attack is to prevent high-trust (repository
automation) processes from running on the same hosts as low-trust (unit test)
processes. For example, use an `automation.mycompany.com` host or pool for
repository automation, and a `build.mycompany.com` host or pool for tests.
Applying an Isolation Policy
============================
Designing a security and isolation policy for Drydock can take some thought,
but applying it is straightforward. Applications which want to use Drydock must
explicitly list which blueprints they are allowed to use, and they must be
approved to use them in Drydock. By default, nothing can do anything, which is
very safe and secure.
To get builds or automation running on a host, specify the host blueprint as a
usable blueprint in the build step or repository configuration. This creates a
new authorization request in Drydock which must be approved before things can
move forward.
Until the authorization is approved, the process can not use the blueprint to
create any resources, nor can it use resources previously created by the
blueprint.
You can review and approve requests from the blueprint detail view in Drydock:
find the request and click {nav Approve Authorization}. You can also revoke
approval at any time from this screen which will prevent the object from
continuing to use the blueprint (but note that this does not release any
existing leases).
Once the authorization request is approved, the build or automation process
should be able to run if everything else is configured properly.
Note that authorizations are transitive: if a build step is authorized to use
blueprint A, and blueprint A is authorized to use blueprint B, the build step
may indirectly operate on resources created by blueprint B. This should
normally be consistent with expectations.
Next Steps
==========
Continue by:
- returning to the @{article:Drydock User Guide}.
c4science · Help