Homec4science
Diffusion Phabricator (production) Browse

phab/src/docs/user/field/repository_imports.diviner
c8281bc33927production

Last Change
Raw File

repository_imports.diviner
View Options

@title Troubleshooting Repository Imports
@group fieldmanual
Guide to the troubleshooting repositories which import incompletely.
Overview
========
When you first import an external source code repository (or push new commits to
a hosted repository), Phabricator imports those commits in the background.
While a repository is initially importing, some features won't work. While
individual commits are importing, some of their metadata won't be available in
the web UI.
Sometimes, the import process may hang or fail to complete. This document can
help you understand the import process and troubleshoot problems with it.
Understanding the Import Pipeline
=================================
Phabricator first performs commit discovery on repositories. This examines
a repository and identifies all the commits in it at a very shallow level,
then creates stub objects for them. These stub objects primarily serve to
assign various internal IDs to each commit.
Commit discovery occurs in the update phase, and you can learn more about
updates in @{article:Diffusion User Guide: Repository Updates}.
After commits are discovered, background tasks are queued to actually import
commits. These tasks do things like look at commit messages, trigger mentions
and autoclose rules, cache changes, trigger Herald, publish feed stories and
email, and apply Owners rules. You can learn more about some of these steps in
@{article:Diffusion User Guide: Autoclose}.
Specifically, the import pipeline has four steps:
- **Message**: Parses the commit message and author metadata.
- **Change**: Caches the paths the commit affected.
- **Owners**: Runs Owners rules.
- **Herald**: Runs Herald rules and publishes notifications.
These steps run in sequence for each commit, but all discovered commits import
in parallel.
Identifying Missing Steps
=========================
There are a few major pieces of information you can look at to understand where
the import process is stuck.
First, to identify which commits have missing import steps, run this command:
```
phabricator/ $ ./bin/repository importing rXYZ
```
That will show what work remains to be done. Each line shows a commit which
is discovered but not imported, and the import steps that are remaining for
that commit. Generally, the commit is stuck on the first step in the list.
Second, load the Daemon Console (at `/daemon/` in the web UI). This will show
what work is currently being done and waiting to complete. The most important
sections are "Queued Tasks" (work waiting in queue) and "Leased Tasks"
(work currently being done).
Third, run this command to look at the daemon logs:
```
phabricator/ $ ./bin/phd log
```
This can show you any errors the daemons have encountered recently.
The next sections will walk through how to use this information to understand
and resolve the issue.
Handling Permanent Failures
===========================
Some commits can not be imported, which will permanently stop a repository from
fully importing. These are rare, but can be caused by unusual data in a
repository, version peculiarities, or bugs in the importer.
Permanent failures usually look like a small number of commits stuck on the
"Message" or "Change" steps in the output of `repository importing`. If you
have a larger number of commits, it is less likely that there are any permanent
problems.
In the Daemon console, permanent failures usually look like a small number of
tasks in "Leased Tasks" with a large failure count. These tasks are retrying
until they succeed, but a bug is permanently preventing them from succeeding,
so they'll rack up a large number of retries over time.
In the daemon log, these commits usually emit specific errors showing why
they're failing to import.
These failures are the easiest to identify and understand, and can often be
resolved quickly. Choose some failing commit from the output of `bin/repository
importing` and use this command to re-run any missing steps manually in the
foreground:
```
phabricator/ $ ./bin/repository reparse --importing --trace rXYZabcdef012...
```
This command is always safe to run, no matter what the actual root cause of
the problem is.
If this fails with an error, you've likely identified a problem with
Phabricator. Collect as much information as you can about what makes the commit
special and file a bug in the upstream by following the instructions in
@{article:Contributing Bug Reports}.
If the commit imports cleanly, this is more likely to be caused by some other
issue.
Handling Temporary Failures
===========================
Some commits may temporarily fail to import: perhaps the network or services
may have briefly been down, or some configuration wasn't quite right, or the
daemons were killed halfway through the work.
These commits will retry eventually and usually succeed, but some of the retry
time limits are very conserative (up to 24 hours) and you might not want to
wait that long.
In the Daemon console, temporarily failures usually look like tasks in the
"Leased Tasks" column with a large "Expires" value but a low "Failures" count
(usually 0 or 1). The "Expires" column is showing how long Phabricator is
waiting to retry these tasks.
In the daemon log, these temporary failures might have created log entries, but
might also not have. For example, if the failure was rooted in a network issue
that probably will create a log entry, but if the faiulre was rooted in the
daemons being abruptly killed that may not create a log entry.
You can follow the instructions from "Handling Permanent Failures" above to
reparse steps individually to look for an error that represents a root cause,
but sometimes this can happen because of some transient issue which won't be
identifiable.
The easiest way to fix this is to restart the daemons. When you restart
daemons, all task leases are immediately expired, so any tasks waiting for a
long time will run right away:
```
phabricator/ $ ./bin/phd restart
```
This command is always safe to run, no matter what the actual root cause of
the problem is.
After restarting the daemons, any pending tasks should be able to retry
immediately.
For more information on managing the daemons, see
@{article:Managing Daemons with phd}.
Forced Parsing
==============
In rare cases, the actual tasks may be lost from the task queue. Usually, they
have been stolen by gremlins or spritied away by ghosts, or someone may have
been too ambitious with running manual SQL commands and deleted a bunch of
extra things they shouldn't have.
There is no normal set of conditions under which this should occur, but you can
force Phabricator to re-queue the tasks to recover from it if it does occur.
This will look like missing steps in `repository importing`, but nothing in the
"Queued Tasks" or "Leased Tasks" sections of the daemon console. The daemon
logs will also be empty, since the tasks have vanished.
To re-queue parse tasks for a repository, run this command, which will queue
up all of the missing work in `repository importing`:
```
phabricator/ $ ./bin/repository reparse --importing --all rXYZ
```
This command may cause duplicate work to occur if you have misdiagnosed the
problem and the tasks aren't actually lost. For example, it could queue a
second task to perform publishing, which could cause Phabricator to send a
second copy of email about the commit. Other than that, it is safe to run even
if this isn't the problem.
After running this command, you should see tasks in "Queued Tasks" and "Leased
Tasks" in the console which correspond to the commits in `repository
importing`, and progress should resume.
Forced Imports
==============
In some cases, you might want to force a repository to be flagged as imported
even though the import isn't complete. The most common and reasonable case
where you might want to do this is if you've identified a permanent failure
with a small number of commits (maybe just one) and reported it upstream, and
are waiting for a fix. You might want to start using the repository immediately,
even if a few things can't import yet.
You should be cautious about doing this. The "importing" flag controls
publishing of notifications and email, so if you flag a repository as imported
but it still has a lot of work queued, it may send an enormous amount of email
as that work completes.
To mark a repository as imported even though it really isn't, run this
command:
```
phabricator/ $ ./bin/repository mark-imported rXYZ
```
If you do this by mistake, you can reverse it later by using the
`--mark-not-imported` flag.
General Tips
============
Broadly, `bin/repository` contains several useful debugging commands which
let you figure out where failures are occuring. You can add the `--trace` flag
to any command to get more details about what it is doing. For any command,
you can use `help` to learn more about what it does and which flag it takes:
```
phabricator/ $ bin/repository help <command>
```
In particular, you can use flags with the `repository reparse` command to
manually run parse steps in the foreground, including re-running steps and
running steps out of order.
Next Steps
==========
Continue by:
- returning to the @{article:Diffusion User Guide}.
c4science · Help