Homec4science
Diffusion Phabricator (production) Browse

phab/src/infrastructure/PhabricatorSetup.php
d5b006b2cc6fproduction

Last Change
Raw File

PhabricatorSetup.php
View Options

<?php
final class PhabricatorSetup {
public static function runSetup() {
header("Content-Type: text/plain");
self::write("PHABRICATOR SETUP\n\n");
// Force browser to stop buffering.
self::write(str_repeat(' ', 2048));
usleep(250000);
self::write("This setup mode will guide you through setting up your ".
"Phabricator configuration.\n");
self::writeHeader("CORE CONFIGURATION");
// NOTE: Test this first since other tests depend on the ability to
// execute system commands and will fail if safe_mode is enabled.
$safe_mode = ini_get('safe_mode');
if ($safe_mode) {
self::writeFailure();
self::write(
"Setup failure! You have 'safe_mode' enabled. Phabricator will not ".
"run in safe mode, and it has been deprecated in PHP 5.3 and removed ".
"in PHP 5.4.\n");
return;
} else {
self::write(" okay PHP's deprecated 'safe_mode' is disabled.\n");
}
// NOTE: Also test this early since we can't include files from other
// libraries if this is set strictly.
$open_basedir = ini_get('open_basedir');
if ($open_basedir) {
// 'open_basedir' restricts which files we're allowed to access with
// file operations. This might be okay -- we don't need to write to
// arbitrary places in the filesystem -- but we need to access certain
// resources. This setting is unlikely to be providing any real measure
// of security so warn even if things look OK.
try {
$open_libphutil = class_exists('Future');
} catch (Exception $ex) {
$message = $ex->getMessage();
self::write("Unable to load modules from libphutil: {$message}\n");
$open_libphutil = false;
}
try {
$open_arcanist = class_exists('ArcanistDiffParser');
} catch (Exception $ex) {
$message = $ex->getMessage();
self::write("Unable to load modules from Arcanist: {$message}\n");
$open_arcanist = false;
}
$open_urandom = false;
try {
Filesystem::readRandomBytes(1);
$open_urandom = true;
} catch (FilesystemException $ex) {
self::write($ex->getMessage()."\n");
}
try {
$tmp = new TempFile();
file_put_contents($tmp, '.');
$open_tmp = @fopen((string)$tmp, 'r');
} catch (Exception $ex) {
$message = $ex->getMessage();
$dir = sys_get_temp_dir();
self::write("Unable to open temp files from '{$dir}': {$message}\n");
$open_tmp = false;
}
if (!$open_urandom || !$open_tmp || !$open_libphutil || !$open_arcanist) {
self::writeFailure();
self::write(
"Setup failure! Your server is configured with 'open_basedir' in ".
"php.ini which prevents Phabricator from opening files it needs to ".
"access. Either make the setting more permissive or remove it. It ".
"is unlikely you derive significant security benefits from having ".
"this configured; files outside this directory can still be ".
"accessed through system command execution.");
return;
} else {
self::write(
"[WARN] You have an 'open_basedir' configured in your php.ini. ".
"Although the setting seems permissive enough that Phabricator ".
"will run properly, you may run into problems because of it. It is ".
"unlikely you gain much real security benefit from having it ".
"configured, because the application can still access files outside ".
"the 'open_basedir' by running system commands.\n");
}
} else {
self::write(" okay 'open_basedir' is not set.\n");
}
if (!PhabricatorEnv::getEnvConfig('security.alternate-file-domain')) {
self::write(
"[WARN] You have not configured 'security.alternate-file-domain'. ".
"This makes your installation vulnerable to attack. Make sure you ".
"read the documentation for this parameter and understand the ".
"consequences of leaving it unconfigured.\n");
}
$path = getenv('PATH');
if (empty($path)) {
self::writeFailure();
self::write(
"Setup failure! The environmental \$PATH variable is empty. ".
"Phabricator needs to execute system commands like 'svn', 'git', ".
"'hg', and 'diff'. Set up your webserver so that it passes a valid ".
"\$PATH to the PHP process.\n\n");
if (php_sapi_name() == 'fpm-fcgi') {
self::write(
"You're running php-fpm, so the easiest way to do this is to add ".
"this line to your php-fpm.conf:\n\n".
" env[PATH] = /usr/local/bin:/usr/bin:/bin\n\n".
"Then restart php-fpm.\n");
}
return;
} else {
self::write(" okay \$PATH is nonempty.\n");
}
self::write("[OKAY] Core configuration OKAY.\n");
self::writeHeader("REQUIRED PHP EXTENSIONS");
$extensions = array(
'mysql',
'hash',
'json',
'openssl',
'mbstring',
'iconv',
// There is a chance we might not need this, but some configurations (like
// OAuth or Amazon SES) will require it. Just mark it 'required' since
// it's widely available and relatively core.
'curl',
);
foreach ($extensions as $extension) {
$ok = self::requireExtension($extension);
if (!$ok) {
self::writeFailure();
self::write("Setup failure! Install PHP extension '{$extension}'.");
return;
}
}
$root = dirname(phutil_get_library_root('phabricator'));
self::writeHeader("GIT SUBMODULES");
if (!Filesystem::pathExists($root.'/.git')) {
self::write(" skip Not a git clone.\n\n");
} else {
list($info) = execx(
'(cd %s && git submodule status)',
$root);
foreach (explode("\n", rtrim($info)) as $line) {
$matches = null;
if (!preg_match('/^(.)([0-9a-f]{40}) (\S+)(?: |$)/', $line, $matches)) {
self::writeFailure();
self::write(
"Setup failure! 'git submodule' produced unexpected output:\n".
$line);
return;
}
$status = $matches[1];
$module = $matches[3];
switch ($status) {
case '-':
case '+':
case 'U':
self::writeFailure();
self::write(
"Setup failure! Git submodule '{$module}' is not up to date. ".
"Run:\n\n".
" cd {$root} && git submodule update --init\n\n".
"...to update submodules.");
return;
case ' ':
self::write(" okay Git submodule '{$module}' up to date.\n");
break;
default:
self::writeFailure();
self::write(
"Setup failure! 'git submodule' reported unknown status ".
"'{$status}' for submodule '{$module}'. This is a bug; report ".
"it to the Phabricator maintainers.");
return;
}
}
}
self::write("[OKAY] All submodules OKAY.\n");
self::writeHeader("BASIC CONFIGURATION");
$env = PhabricatorEnv::getEnvConfig('phabricator.env');
if ($env == 'production' || $env == 'default' || $env == 'development') {
self::writeFailure();
self::write(
"Setup failure! Your PHABRICATOR_ENV is set to '{$env}', which is ".
"a Phabricator environmental default. You should create a custom ".
"environmental configuration instead of editing the defaults ".
"directly. See this document for instructions:\n");
self::writeDoc('article/Configuration_Guide.html');
return;
} else {
$host = PhabricatorEnv::getEnvConfig('phabricator.base-uri');
$host_uri = new PhutilURI($host);
$protocol = $host_uri->getProtocol();
$allowed_protocols = array(
'http' => true,
'https' => true,
);
if (empty($allowed_protocols[$protocol])) {
self::writeFailure();
self::write(
"You must specify the protocol over which your host works (e.g.: ".
"\"http:// or https://\")\nin your custom config file.\nRefer to ".
"'default.conf.php' for documentation on configuration options.\n");
return;
}
if (preg_match('/.*\/$/', $host)) {
self::write(" okay phabricator.base-uri protocol\n");
} else {
self::writeFailure();
self::write(
"You must add a trailing slash at the end of the host\n(e.g.: ".
"\"http://phabricator.example.com/ instead of ".
"http://phabricator.example.com\")\nin your custom config file.".
"\nRefer to 'default.conf.php' for documentation on configuration ".
"options.\n");
return;
}
$host_domain = $host_uri->getDomain();
if (strpos($host_domain, '.') !== false) {
self::write(" okay phabricator.base-uri domain\n");
} else {
self::writeFailure();
self::write(
"You must host Phabricator on a domain that contains a dot ('.'). ".
"The current domain, '{$host_domain}', does not have a dot, so some ".
"browsers will not set cookies on it. For instance, ".
"'http://example.com/ is OK, but 'http://example/' won't work. ".
"If you are using localhost, create an entry in the hosts file like ".
"'127.0.0.1 example.com', and access the localhost with ".
"'http://example.com/'.");
return;
}
$host_path = $host_uri->getPath();
if ($host_path == '/') {
self::write(" okay phabricator.base-uri path\n");
} else {
self::writeFailure();
self::write(
"Your 'phabricator.base-uri' setting includes a path, but should ".
"not (e.g., 'http://phabricator.example.com/' is OK, but ".
"'http://example.com/phabricator/' is not). Phabricator must be ".
"installed on an entire domain, it can not be installed on a ".
"path alongside other applications. Consult the documentation ".
"for more details.");
return;
}
}
self::write("[OKAY] Basic configuration OKAY\n");
self::writeHeader("MySQL DATABASE & STORAGE CONFIGURATION");
$conf = PhabricatorEnv::newObjectFromConfig('mysql.configuration-provider');
$conn_user = $conf->getUser();
$conn_pass = $conf->getPassword();
$conn_host = $conf->getHost();
self::write(" okay Trying to connect to MySQL database ".
"{$conn_user}@{$conn_host}...\n");
ini_set('mysql.connect_timeout', 2);
$conn_raw = PhabricatorEnv::newObjectFromConfig(
'mysql.implementation',
array(
array(
'user' => $conn_user,
'pass' => $conn_pass,
'host' => $conn_host,
'database' => null,
),
));
try {
queryfx($conn_raw, 'SELECT 1');
self::write(" okay Connection successful!\n");
} catch (AphrontQueryConnectionException $ex) {
$message = $ex->getMessage();
self::writeFailure();
self::write(
"Setup failure! MySQL exception: {$message} \n".
"Edit Phabricator configuration keys 'mysql.user', ".
"'mysql.host' and 'mysql.pass' to enable Phabricator ".
"to connect.");
return;
}
$engines = queryfx_all($conn_raw, 'SHOW ENGINES');
$engines = ipull($engines, 'Support', 'Engine');
$innodb = idx($engines, 'InnoDB');
if ($innodb != 'YES' && $innodb != 'DEFAULT') {
self::writeFailure();
self::write(
"Setup failure! The 'InnoDB' engine is not available. Enable ".
"InnoDB in your MySQL configuration. If you already created tables, ".
"MySQL incorrectly used some other engine. You need to convert ".
"them or drop and reinitialize them.");
return;
} else {
self::write(" okay InnoDB is available.\n");
}
$namespace = PhabricatorEnv::getEnvConfig('storage.default-namespace');
$databases = queryfx_all($conn_raw, 'SHOW DATABASES');
$databases = ipull($databases, 'Database', 'Database');
if (empty($databases[$namespace.'_meta_data'])) {
self::writeFailure();
self::write(
"Setup failure! You haven't run 'bin/storage upgrade'. See this ".
"article for instructions:\n");
self::writeDoc('article/Configuration_Guide.html');
return;
} else {
self::write(" okay Databases have been initialized.\n");
}
self::write("[OKAY] Database and storage configuration OKAY\n");
self::writeHeader('SUCCESS!');
self::write(
"Congratulations! Your setup seems mostly correct, or at least fairly ".
"reasonable.\n\n".
"*** NEXT STEP ***\n".
"Edit your configuration file (conf/{$env}.conf.php) and remove the ".
"'phabricator.setup' line to finish installation.");
}
public static function requireExtension($extension) {
if (extension_loaded($extension)) {
self::write(" okay Extension '{$extension}' installed.\n");
return true;
} else {
self::write("[FAIL] Extension '{$extension}' is NOT INSTALLED!\n");
return false;
}
}
private static function writeFailure() {
self::write("\n\n<<< *** FAILURE! *** >>>\n");
}
private static function write($str) {
echo $str;
ob_flush();
flush();
// This, uh, makes it look cool. -_-
usleep(20000);
}
public static function writeHeader($header) {
$template = '>>>'.str_repeat('-', 77);
$template = substr_replace(
$template,
' '.$header.' ',
3,
strlen($header) + 4);
self::write("\n\n{$template}\n\n");
}
public static function writeDoc($doc) {
self::write(
"\n".
' http://www.phabricator.com/docs/phabricator/'.$doc.
"\n\n");
}
}
c4science · Help