Homec4science
Diffusion Phabricator (stable) Browse

phab/src/docs/user/configuration/configuring_file_storage.diviner
cbba54413f99stable

Last Change
Raw File

configuring_file_storage.diviner
View Options

@title Configuring File Storage
@group config
Setup file storage and support for large files.
Overview
========
This document describes how to configure Phabricator to support large file
uploads, and how to choose where Phabricator stores files.
There are two major things to configure:
- set up PHP and your HTTP server to accept large requests;
- choose and configure a storage engine.
The following sections will guide you through this configuration.
How Phabricator Stores Files
============================
Phabricator stores files in "storage engines", which are modular backends
that implement access to some storage system (like MySQL, the filesystem, or
a cloud storage service like Amazon S3).
Phabricator stores large files by breaking them up into many chunks (a few
megabytes in size) and storing the chunks in an underlying storage engine.
This makes it easier to implement new storage engines and gives Phabricator
more flexibility in managing file data.
The first section of this document discusses configuring your install so that
PHP and your HTTP server will accept requests which are larger than the size of
one file chunk. Without this configuration, file chunk data will be rejected.
The second section discusses choosing and configuring storage engines, so data
is stored where you want it to be.
Configuring Upload Limits
=========================
File uploads are limited by several pieces of configuration at different layers
of the stack. Generally, the minimum value of all the limits is the effective
one.
To upload large files, you need to increase all the limits to at least
**32MB**. This will allow you to upload file chunks, which will let Phabricator
store arbitrarily large files.
The settings which limit file uploads are:
**HTTP Server**: The HTTP server may set a limit on the maximum request size.
If you exceed this limit, you'll see a default server page with an HTTP error.
These directives limit the total size of the request body, so they must be
somewhat larger than the desired maximum filesize.
- **Apache**: Apache limits requests with the Apache `LimitRequestBody`
directive.
- **nginx**: nginx limits requests with the nginx `client_max_body_size`
directive. This often defaults to `1M`.
- **lighttpd**: lighttpd limits requests with the lighttpd
`server.max-request-size` directive.
Set the applicable limit to at least **32MB**. Phabricator can not read these
settings, so it can not raise setup warnings if they are misconfigured.
**PHP**: PHP has several directives which limit uploads. These directives are
found in `php.ini`.
- **post_max_size**: Maximum POST request size PHP will accept. If you
exceed this, Phabricator will give you a useful error. This often defaults
to `8M`. Set this to at least `32MB`. Phabricator will give you a setup
warning about this if it is set too low.
- **memory_limit**: For some uploads, file data will be read into memory
before Phabricator can adjust the memory limit. If you exceed this, PHP
may give you a useful error, depending on your configuration. It is
recommended that you set this to `-1` to disable it. Phabricator will
give you a setup warning about this if it is set too low.
You may also want to configure these PHP options:
- **max_input_vars**: When files are uploaded via HTML5 drag and drop file
upload APIs, PHP parses the file body as though it contained normal POST
parameters, and may trigger `max_input_vars` if a file has a lot of
brackets in it. You may need to set it to some astronomically high value.
- **upload_max_filesize**: Maximum file size PHP will accept in a raw file
upload. This is not normally used when uploading files via drag-and-drop,
but affects some other kinds of file uploads. If you exceed this,
Phabricator will give you a useful error. This often defaults to `2M`. Set
this to at least `32MB`.
Once you've adjusted all this configuration, your server will be able to
receive chunk uploads. As long as you have somewhere to store them, this will
enable you to store arbitrarily large files.
Storage Engines
===============
Phabricator supports several different file storage engines:
| Engine | Setup | Cost | Notes |
|--------|-------|------|-------|
| MySQL | Automatic | Free | May not scale well. |
| Local Disk | Easy | Free | Does not scale well. |
| Amazon S3 | Easy | Cheap | Scales well. |
| Custom | Hard | Varies | Implement a custom storage engine. |
You can review available storage engines and their configuration by navigating
to {nav Applications > Files > Help/Options > Storage Engines} in the web UI.
By default, Phabricator is configured to store files up to 1MB in MySQL, and
reject files larger than 1MB. To store larger files, you can either:
- increase the MySQL limit to at least 8MB; or
- configure another storage engine.
Doing either of these will enable the chunk storage engine and support for
arbitrarily large files.
The remaining sections of this document discuss the available storage engines
and how to configure them.
Engine: MySQL
=============
- **Pros**: Low latency, no setup required.
- **Cons**: Storing files in a database is a classic bad idea. May become
difficult to administrate if you have a large amount of data.
MySQL storage is configured by default, for files up to (just under) 1MB. You
can configure it with these keys:
- `storage.mysql-engine.max-size`: Change the filesize limit, in bytes. Set
to 0 to disable.
For most installs, it is reasonable to leave this engine as-is and let small
files (like thumbnails and profile images) be stored in MySQL, which is usually
the lowest-latency filestore, even if you configure another storage engine.
To support large files, increase this limit to at least `8388608` (8MB).
This will activate chunk storage in MySQL.
Engine: Local Disk
==================
- **Pros**: Simple to setup.
- **Cons**: Doesn't scale to multiple web frontends without NFS.
To configure file storage on the local disk, set:
- `storage.local-disk.path`: Set to some writable directory on local disk.
Make that directory.
Engine: Amazon S3
=================
- **Pros**: Scales well.
- **Cons**: Slightly more complicated than other engines, not free.
To enable file storage in S3, set these keys:
- `amazon-s3.access-key`: Your AWS access key.
- `amazon-s3.secret-key`: Your AWS secret key.
- `amazon-s3.region`: Your AWS S3 region.
- `amazon-s3.endpoint`: Your AWS S3 endpoint.
- `storage.s3.bucket`: S3 bucket name where files should be stored.
Testing Storage Engines
=======================
You can test that things are correctly configured by dragging and dropping
a file onto the Phabricator home page. If engines have been configured
properly, the file should upload.
Migrating Files Between Engines
===============================
If you want to move files between storage engines, you can use the `bin/files`
script to perform migrations. For example, suppose you previously used MySQL but
recently set up S3 and want to migrate all your files there. First, migrate one
file to make sure things work:
phabricator/ $ ./bin/files migrate --engine amazon-s3 F12345
If that works properly, you can then migrate everything:
phabricator/ $ ./bin/files migrate --engine amazon-s3 --all
You can use `--dry-run` to show which migrations would be performed without
taking any action. Run `bin/files help` for more options and information.
Next Steps
==========
Continue by:
- reviewing at-rest encryption options with
@{article:Configuring Encryption}; or
- returning to the @{article:Configuration Guide}.
c4science · Help