DEE_Emulation_16-bit.c
No OneTemporary
Actions

Subscribers

None

File Metadata

Created: Sun, Feb 23, 05:08

DEE_Emulation_16-bit.c
View Options

	/************************************************************************
	*
	* Emulating Data EEPROM for PIC24 Microcontrollers and
	* dsPIC Digital Signal Controllers
	*
	* This application note provides a standard interface to an efficient
	* Data EEPROM emulation algorithm and uses available program memory.
	* It is designed for Microchip Technology 16-bit PIC and dsPIC J devices
	* which currently include PIC24F, PIC24H and dsPIC33 products. The
	* project is initially configured to use PIC24FJ128GA010 on the Explorer
	* 16 Development Board. To use different device, simply select new device
	* in MPLAB, replace C30 linker script and rebuild.
	* User must select number pages of program memory, erase/write limit and
	* emulated DEE size. These are defined in "DEE Emulation 16-bit.h".
	* At build-time, the linker reserves pages in the next available
	* locations in program memory. Compiler error occurs if more than 255
	* DEE locations are declared, less than 2 pages of program memory is
	* reserved, greater than 65,535 erase/write cycles specified or if
	* insufficient program memory is available.
	* Call initialization routine and clear status flags before attempting
	* any other DEE operation.
	*
	*************************************************************************
	* FileName: DEE Emulation 16-bit.c
	* Dependencies: Flash Operations.s
	* DEE Emulation 16-bit.h
	* Compiler: MPLAB C30, v2.01 or higher
	* Company: Microchip Technology, Inc.
	*
	* Software License Agreement
	*
	* Copyright � 2007 Microchip Technology Inc. All rights reserved.
	*
	* Microchip licenses to you the right to use, modify, copy and distribute
	* Software only when embedded on a Microchip microcontroller or digital
	* signal controller, which is integrated into your product or third party
	* product (pursuant to the sublicense terms in the accompanying license
	* agreement).
	*
	* You should refer to the license agreement accompanying this Software for
	* additional information regarding your rights and obligations.
	*
	* SOFTWARE AND DOCUMENTATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY
	* KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY
	* WARRANTY OF MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A
	* PARTICULAR PURPOSE. IN NO EVENT SHALL MICROCHIP OR ITS LICENSORS BE
	* LIABLE OR OBLIGATED UNDER CONTRACT, NEGLIGENCE, STRICT LIABILITY,
	* CONTRIBUTION, BREACH OF WARRANTY, OR OTHER LEGAL EQUITABLE THEORY ANY
	* DIRECT OR INDIRECT DAMAGES OR EXPENSES INCLUDING BUT NOT LIMITED TO ANY
	* INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES, LOST
	* PROFITS OR LOST DATA, COST OF PROCUREMENT OF SUBSTITUTE GOODS, TECHNOLOGY,
	* SERVICES, OR ANY CLAIMS BY THIRD PARTIES (INCLUDING BUT NOT LIMITED TO
	* ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
	*
	* Author Date Comment
	*************************************************************************
	* D. Otten 2007/05/01 Version 1.0.0 - Initial Release
	* D. Otten 2007/05/15 Version 1.0.1 - First publication release
	* Pradeep Budagutta 2008/04/02 Version 1.1.0 - Multi EEPROM banks included
	* Pradeep Budagutta 2008/05/05 Version 1.1.1 - TBLPAG page boundary problem solved
	* Pradeep Budagutta 2009/08/31 Version 1.1.2 - A bug related to initial storage of value 0xFF solved
	************************************************************************/

	#if defined (__dsPIC33F__)
	#include <p33Fxxxx.h>
	#elif defined (__PIC24H__)
	#include <p24Hxxxx.h>
	#elif defined (__PIC24F__)
	#include <p24Fxxxx.h>
	#else
	#error Selected processor not supported
	#endif

	#include <sbcp-uc/DEE_Emulation_16-bit.h>

	// User constant validation
	#if DATA_EE_BANKS == 0
	#error Minimum data EE banks is 1
	#endif

	#if DATA_EE_SIZE > 255
	#error Maximum data EE size is 255
	#endif

	#if NUM_DATA_EE_PAGES < 2
	#error Minimum number of program memory pages is 2
	#endif

	#if ERASE_WRITE_CYCLE_MAX > 65535
	#error Maximum number of erase/write cycles is 65,535
	#endif


	DATA_EE_FLAGS dataEEFlags;

	//Data EE info stored in PM in following format
	// Status in first two locations of PM page,
	// 8-bit DEE Address (odd address, low byte) 16-bit DEE data (even address)
	unsigned char emulationPages[DATA_EE_BANKS * NUM_DATA_EE_PAGES][NUMBER_OF_INSTRUCTIONS_IN_PAGE * 2]
	__attribute__ ((space(psv), aligned(NUMBER_OF_INSTRUCTIONS_IN_PAGE * 2), noload));

	#define DEE_BANK_SIZE (sizeof(emulationPages[0])*NUM_DATA_EE_PAGES)
	#define DEE_PAGE_SIZE (sizeof(emulationPages[0]))

	#if __C30_VERSION__ > 301
	#define DEE_PAGE_TBL(bank, page) ((__builtin_tbladdress(&emulationPages) + (DEE_BANK_SIZE * (bank)) + (DEE_PAGE_SIZE * (page))) >> 16)
	#define DEE_PAGE_OFFSET(bank, page) ((__builtin_tbladdress(&emulationPages) + (DEE_BANK_SIZE * (bank)) + (DEE_PAGE_SIZE * (page))) & 0xFFFF)
	#else
	#warning "Please upgrade your C30 compiler"
	#define DEE_PAGE_TBL(bank, page) ((((((unsigned long)__builtin_tblpage(&emulationPages)) << 16) + __builtin_tbloffset(&emulationPages)) + \
	(DEE_BANK_SIZE * (bank)) + (DEE_PAGE_SIZE * (page))) >> 16)
	#define DEE_PAGE_OFFSET(bank, page) ((((((unsigned long)__builtin_tblpage(&emulationPages)) << 16) + __builtin_tbloffset(&emulationPages)) + \
	(DEE_BANK_SIZE * (bank)) + (DEE_PAGE_SIZE * (page))) & 0xFFFF)
	#endif

	/************************************************************************
	UnlockWrite

	This routine saves the current CPU priority and sets it the highest
	user level of 7. It calls an assembly routine to perform an unlock
	sequence and sets the WR bit in NVMCON. The WR bit is polled until it
	clears indicating the flash operation is complete. The previous CPU
	priority is restored.

	Parameters: None
	Return: None
	Side Effects: None
	************************************************************************/
	void UnlockWrite(void)
	{
	unsigned int sh_SR;

	SET_AND_SAVE_CPU_IPL(sh_SR, 7);

	UnlockPM();

	RESTORE_CPU_IPL(sh_SR);

	return;
	}

	/************************************************************************
	GetPageStatus

	This routine returns the page status for the selected page for the
	selected field. The return value is right shifted into LSb position.

	Parameters: Page number, Status Field
	Return: Right justified bit value representing selected Status
	Field value
	Side Effects: None
	************************************************************************/
	int GetPageStatus(unsigned char bank, unsigned char page, unsigned char field)
	{
	unsigned int statusOffset;
	unsigned char statusByte;
	unsigned char status;
	int savedTBLPAG; //Context save of TBLPAG value. Current and packed page are on same page.

	savedTBLPAG = TBLPAG;

	// Point to proper TBLPAG and offset
	TBLPAG = DEE_PAGE_TBL(bank, page);
	statusOffset = DEE_PAGE_OFFSET(bank, page);

	statusByte = (ReadPMHigh(statusOffset) & 0xFF);

	switch(field)
	{
	case STATUS_AVAILABLE:
	status = ((statusByte & 4) >> 2);
	break;
	case STATUS_CURRENT:
	status = ((statusByte & 8) >> 3);
	break;
	case STATUS_EXPIRED:
	status = ((statusByte & 16) >> 4);
	break;
	default:
	status = 0;
	break;
	}

	TBLPAG = savedTBLPAG;

	return(status);
	}

	/************************************************************************
	ErasePage

	This routine erases the selected page.

	Parameters: Page number
	Return: None
	Side Effects: Loads NVCOM with erase opcode
	************************************************************************/
	void ErasePage(unsigned char bank, unsigned char page)
	{
	unsigned int pmOffset; //Current array (page) offset of selected element (PM 16-bit word)
	int savedTBLPAG; //Context save of TBLPAG value. Current and packed page are on same page.

	savedTBLPAG = TBLPAG;

	// Point to proper TBLPAG and offset
	TBLPAG = DEE_PAGE_TBL(bank, page);

	NVMCON = ERASE;

	pmOffset = DEE_PAGE_OFFSET(bank, page);

	WritePMLow(pmOffset, pmOffset);

	UnlockWrite();

	TBLPAG = savedTBLPAG;

	return;
	}

	/************************************************************************
	GetNextAvailCount

	This routine finds the active page and performs a backward search to find
	the first available location. The available location is determined by
	reading an LSB (odd address) with 0xFF. The returned value can be added
	to the first address in page to compute the available address. A return
	value of 0 means the entire page was filled which is an error condition.
	This routine can be called by the user to determine how full the current
	page is prior to a pack.

	Parameters: None
	Return: Page offset to next available location
	Side Effects: None
	************************************************************************/
	unsigned int GetNextAvailCount(unsigned char bank)
	{
	int i = 0;
	int currentPage; //Array row (PM page) of active DEE page
	unsigned char dataEEval;
	unsigned int pmOffset; //Current array (page) offset of selected element (PM 16-bit word)
	int savedTBLPAG; //Context save of TBLPAG value. Current and packed page are on same page.

	savedTBLPAG = TBLPAG;

	// Find the active page.
	for (currentPage = 0;
	(currentPage < NUM_DATA_EE_PAGES) &&
	(GetPageStatus(bank, currentPage, STATUS_CURRENT) == PAGE_NOT_CURRENT);
	currentPage++) {}

	TBLPAG = DEE_PAGE_TBL(bank, currentPage);
	pmOffset = DEE_PAGE_OFFSET(bank, currentPage);

	do
	{
	i+=2;
	pmOffset += 2;

	dataEEval = (ReadPMHigh(pmOffset) & 0xFF);
	}
	while ((i<NUMBER_OF_INSTRUCTIONS_IN_PAGE * 2) && (dataEEval != 0xFF));

	if(i == NUMBER_OF_INSTRUCTIONS_IN_PAGE * 2)
	{
	i = 0; //Error - No available locations
	}

	TBLPAG = savedTBLPAG;

	return(i);
	}

	/************************************************************************
	PackEE

	This routine finds the active page and an unexpired packed page. The most
	recent data EEPROM values are located for each address using ReadEE
	function and written into write latches. Page status is read from active
	page and erase/write count is incremented if page 0 is packed. After all
	information is programmed and verified, the current page is erased. The
	packed page becomes the active page. This function can be called at any-
	time by the user to schedule the CPU stall.

	Parameters: None
	Return: Status value (0 for pass)
	Side Effects: Generates CPU stall during program/erase operations and
	overwrites program memory write latches. Data EE flags
	may be updated
	************************************************************************/
	int PackEE(unsigned char bank)
	{
	int currentPage; //Array row (PM page) of active DEE page
	int packedPage; //Array row (PM page) of packed page
	int savedTBLPAG; //Context save of TBLPAG value. Current and packed page are on same page.
	int currentOffset; //Current page offset
	int packedOffset; //Packed page offset
	int i;
	unsigned char latchAddr;
	unsigned int latchData;
	unsigned char dataEEFlags_sh;

	savedTBLPAG = TBLPAG;

	// Find the active page.
	for (currentPage = 0;
	(currentPage < NUM_DATA_EE_PAGES) &&
	(GetPageStatus(bank, currentPage, STATUS_CURRENT) == PAGE_NOT_CURRENT);
	currentPage++) {}


	if (currentPage == NUM_DATA_EE_PAGES)
	{
	TBLPAG = savedTBLPAG;
	SetPagePackBeforeInit(1);
	return(3); // Error - no active page
	}
	else
	{
	// Find the next unexpired page to use
	packedPage = currentPage + 1;
	if (packedPage == NUM_DATA_EE_PAGES)
	{
	packedPage = 0;
	}
	while(GetPageStatus(bank, packedPage, STATUS_EXPIRED) == PAGE_EXPIRED)
	{
	packedPage++;
	if (packedPage == NUM_DATA_EE_PAGES)
	{
	packedPage = 0;
	}
	if(packedPage == currentPage)
	{
	TBLPAG = savedTBLPAG;
	SetPageExpiredPage(1);
	return(1); // Error - all pages expired
	}
	}
	}

	// Point to first location in packed page
	TBLPAG = DEE_PAGE_TBL(bank, packedPage);
	packedOffset = DEE_PAGE_OFFSET(bank, packedPage);

	if(GetNextAvailCount(bank))
	{
	SetPagePackBeforePageFull(1); // Pack called before the page was full
	}

	dataEEFlags_sh = dataEEFlags.val;
	SetaddrNotFound(0); // Initialize flag
	i = 0;
	NVMCON = PROGRAM_ROW;

	WritePMLow(0xFFFF, packedOffset);
	WritePMHigh(0xFF, packedOffset);
	packedOffset += 2;

	latchAddr = 0;
	i++;

	do
	{
	while((latchAddr != DATA_EE_SIZE) && (i < NUMBER_OF_INSTRUCTIONS_IN_ROW))
	{
	latchData = DataEERead((255 * bank) + latchAddr);
	if(GetaddrNotFound()) //if address is unwritten, skip to next address
	{
	SetaddrNotFound(0);
	}
	else
	{
	WritePMLow(latchData, packedOffset);
	WritePMHigh(latchAddr, packedOffset);
	packedOffset += 2;
	i++;
	}
	latchAddr++;
	while((latchAddr == DATA_EE_SIZE) && (i < NUMBER_OF_INSTRUCTIONS_IN_ROW))
	{
	WritePMLow(0xFFFF, packedOffset);
	WritePMHigh(0xFF, packedOffset);
	packedOffset += 2;
	i++;
	}
	}
	UnlockWrite();
	i = 0;
	}
	while(latchAddr != DATA_EE_SIZE);

	dataEEFlags.val = dataEEFlags_sh; //Restore status flags

	//Verify data was written correctly into packed page

	// Point to first location after status
	TBLPAG = DEE_PAGE_TBL(bank, packedPage);
	packedOffset = DEE_PAGE_OFFSET(bank, packedPage) + 2;

	latchAddr = ReadPMHigh(packedOffset++);
	latchData = ReadPMLow(packedOffset++);

	while(latchAddr != 0xFF)
	{
	if(DataEERead((255 * bank) + latchAddr) != latchData)
	{
	TBLPAG = savedTBLPAG;
	SetPageWriteError(1);
	return(7); //Error - data does not match
	}
	latchAddr = ReadPMHigh(packedOffset++);
	latchData = ReadPMLow(packedOffset++);
	}


	//Program page status
	currentOffset = DEE_PAGE_OFFSET(bank, currentPage);
	packedOffset = DEE_PAGE_OFFSET(bank, packedPage);

	// Point to proper TBLPAG
	TBLPAG = DEE_PAGE_TBL(bank, currentPage);
	latchData = ReadPMLow(currentOffset);
	latchAddr = ReadPMHigh(currentOffset);
	if(packedPage == 0)
	{
	latchData++; //Increment E/W counter
	}

	if (latchData >= ERASE_WRITE_CYCLE_MAX - 1)
	{
	SetPageExpiredPage(1);
	latchAddr &= 0b11101111;
	}

	// Point to proper TBLPAG
	TBLPAG = DEE_PAGE_TBL(bank, packedPage);
	WritePMHigh(latchAddr, packedOffset);
	WritePMLow(latchData, packedOffset);

	NVMCON = PROGRAM_WORD;
	UnlockWrite();

	if((latchAddr != ReadPMHigh(packedOffset)) \|\|
	(latchData != ReadPMLow(packedOffset)))
	{
	TBLPAG = savedTBLPAG;
	SetPageWriteError(1);
	return(7);
	}

	//Erase active page
	ErasePage(bank, currentPage);

	TBLPAG = savedTBLPAG;
	return(GetPageExpiredPage());
	}

	/************************************************************************
	DataEEInit

	This routine finds an unexpired page to become an active page. It then
	counts the number of active pages. If no active pages are found, the
	first unexpired page is initialized for emulation. If one active page is
	found, it is assumes a reset occurred and the function does nothing. If
	two active pages are found, it is assumes a reset occurred during a pack.
	The second page is erased and a pack is called. If three, an error code
	is returned as the allocated memory is assumed to be corrupted. This
	function must be called prior to any other operation.

	Parameters: None
	Return: Status value (0 for pass)
	Side Effects: Data EE flags may be updated.
	************************************************************************/
	unsigned char DataEEInit(void)
	{
	unsigned char pageCnt;
	unsigned char erasePage;
	unsigned int savedTBLPAG; //Context save of TBLPAG value. Current and packed page are on same page.
	unsigned int currentPage;
	unsigned int statusOffset;
	int packedPage; //Array row (PM page) of packed page
	unsigned char bank;

	savedTBLPAG = TBLPAG;

	// Point the table page pointer to the emulation pages
	TBLPAG = DEE_PAGE_TBL(0, 0);

	for(bank = 0; bank < DATA_EE_BANKS; bank++)
	{
	pageCnt = 0;
	erasePage = 0;
	packedPage = 0;

	// Find unexpired page
	for (currentPage = 0;
	(currentPage < NUM_DATA_EE_PAGES) &&
	(GetPageStatus(bank, currentPage, STATUS_EXPIRED) == PAGE_EXPIRED);
	currentPage++) {}

	if (currentPage == NUM_DATA_EE_PAGES)
	{
	TBLPAG = savedTBLPAG;
	SetPageExpiredPage(1);
	return(1); // Error - All pages expired
	}

	// Count active page(s).
	for (currentPage = 0; currentPage < NUM_DATA_EE_PAGES; currentPage++)
	{
	if(GetPageStatus(bank, currentPage, STATUS_CURRENT) == PAGE_CURRENT)
	{
	pageCnt++;
	}
	}

	//If no active pages found, initialize page 0
	if(pageCnt == 0)
	{
	ErasePage(bank, 0);

	// Point to proper TBLPAG and offset
	TBLPAG = DEE_PAGE_TBL(bank, 0);
	statusOffset = DEE_PAGE_OFFSET(bank, 0);

	NVMCON = PROGRAM_WORD;

	WritePMLow(0, statusOffset); //New page: unavailable, active, reset count
	WritePMHigh(0xF3, statusOffset);
	UnlockWrite();

	TBLPAG = savedTBLPAG;
	continue;
	}
	//If one active page, do nothing
	else if(pageCnt == 1)
	{
	TBLPAG = savedTBLPAG;
	continue;
	}
	//If two active pages, erase second and repack first
	else if(pageCnt == 2)
	{
	if((GetPageStatus(bank, NUM_DATA_EE_PAGES - 1, STATUS_CURRENT) == PAGE_CURRENT) &&
	(GetPageStatus(bank, 0, STATUS_CURRENT) == PAGE_CURRENT))
	{
	currentPage = NUM_DATA_EE_PAGES - 1;
	erasePage = 0;
	}
	else
	{
	currentPage = 0;
	while((GetPageStatus(bank, currentPage, STATUS_CURRENT) == PAGE_NOT_CURRENT) &&
	(currentPage < NUM_DATA_EE_PAGES))
	{
	currentPage++;
	}
	erasePage = currentPage + 1;
	if (erasePage == NUM_DATA_EE_PAGES)
	{
	erasePage = 0;
	}
	}
	ErasePage(bank, erasePage);

	if(!GetNextAvailCount(bank))
	{
	PackEE(bank);
	}
	TBLPAG = savedTBLPAG;
	continue;
	}
	else
	{
	TBLPAG = savedTBLPAG;
	SetPageCorruptStatus(1);
	return(6);
	}
	}
	return(0);
	}

	/************************************************************************
	DataEERead

	This routine verifies the address is valid. If not, the Illegal Address
	flag is set and 0xFFFF is returned. It then finds the active page. If an
	active page can not be found, the Page Corrupt status bit is set and
	0xFFFF is returned. A reverse search of the active page attempts to find
	the matching address in the program memory MSB (odd address). If a match
	is found, the corresponding data EEPROM data (even address) is returned,
	otherwise 0xFFFF is returned. This function can be called by the user.

	Parameters: Data EE address
	Return: Data EE data or 0xFFFF if address not found
	Side Effects: Data EE flags may be updated.
	************************************************************************/
	unsigned int DataEERead(unsigned int addr)
	{
	unsigned int savedTBLPAG; //Context save of TBLPAG value. Current and packed page are on same page.
	unsigned int currentPage;
	unsigned int pmOffset; //Current array (page) offset of selected element (PM 16-bit word)
	unsigned int latch;
	unsigned int i;
	unsigned char bank;

	if(addr >= DATA_EE_TOTAL_SIZE)
	{
	SetPageIllegalAddress(1);
	return(0xFFFF);
	}

	bank = addr / DATA_EE_SIZE;

	savedTBLPAG = TBLPAG;

	// Find the active page.
	for (currentPage = 0;
	(currentPage < NUM_DATA_EE_PAGES) &&
	(GetPageStatus(bank, currentPage, STATUS_CURRENT) == PAGE_NOT_CURRENT);
	currentPage++) {}

	if (currentPage == NUM_DATA_EE_PAGES)
	{
	TBLPAG = savedTBLPAG;
	SetPageCorruptStatus(1);
	return(0xFFFF); // Error - no active page
	}

	// Point to proper TBLPAG and offset
	TBLPAG = DEE_PAGE_TBL(bank, currentPage);
	pmOffset = DEE_PAGE_OFFSET(bank, (currentPage + 1)) - 2;

	i=NUMBER_OF_INSTRUCTIONS_IN_PAGE;

	do
	{
	latch = ReadPMHigh(pmOffset);
	pmOffset -= 2;

	i--;
	}
	while((i > 0) && (latch != (addr % DATA_EE_SIZE)));

	if(!i)
	{
	SetaddrNotFound(1);
	TBLPAG = savedTBLPAG;
	return(0xFFFF);
	}

	pmOffset += 2;
	latch = ReadPMLow(pmOffset);

	TBLPAG = savedTBLPAG;
	return(latch);
	}

	/************************************************************************
	DataEEWrite

	This routine verifies the address is valid. If not, the Illegal Address
	flag is set and an error code is returned. It then finds the active page.
	If an active page can not be found, the Page Corrupt status bit is set
	and an error code is returned. A read is performed, if the data was not
	changed, the function exits. If the last location is programmed, the Pack
	Skipped error flag is set (one location should always be available). The
	data EE information (MSB = address, LSW = data) is programmed and
	verified. If the verify fails, the Write Error flag is set. If the write
	went into the last location of the page, pack is called. This function
	can be called by the user.

	Parameters: Data EE address and data
	Return: Pass or fail status (0 = Pass)
	Side Effects: Data EE flags may be updated. CPU stall occurs for flash
	programming. Pack may be generated.
	************************************************************************/
	unsigned char DataEEWrite(unsigned int data, unsigned int addr)
	{
	int savedTBLPAG; //Context save of TBLPAG value. Current and packed page are on same page.
	int currentPage;
	int pmOffset; //Current array (page) offset of selected element (PM 16-bit word)
	unsigned int nextLoc;
	volatile unsigned char latch;
	unsigned char dataEEFlags_sh;
	unsigned int bank;

	if(addr >= DATA_EE_TOTAL_SIZE)
	{
	SetPageIllegalAddress(1);
	return(5);
	}

	bank = addr / DATA_EE_SIZE;

	savedTBLPAG = TBLPAG;
	NVMCON = PROGRAM_WORD;

	// Find the active page.
	for (currentPage = 0;
	(currentPage < NUM_DATA_EE_PAGES) &&
	(GetPageStatus(bank, currentPage, STATUS_CURRENT) == PAGE_NOT_CURRENT);
	currentPage++) {}

	if (currentPage == NUM_DATA_EE_PAGES)
	{
	TBLPAG = savedTBLPAG;
	SetPageCorruptStatus(1);
	return(6); // Error - no active page
	}

	// Point to proper TBLPAG and offset
	TBLPAG = DEE_PAGE_TBL(bank, currentPage);
	pmOffset = DEE_PAGE_OFFSET(bank, currentPage);

	dataEEFlags_sh = dataEEFlags.val;

	//Do not write data if it did not change
	if(DataEERead(addr) == data)
	{
	if(GetaddrNotFound() == 0) // Check if the read was successful
	{
	TBLPAG = savedTBLPAG;
	dataEEFlags.val = dataEEFlags_sh;
	return(0);
	}
	}

	dataEEFlags.val = dataEEFlags_sh; //Restore status flags
	nextLoc = GetNextAvailCount(bank);

	if(!nextLoc)
	{
	TBLPAG = savedTBLPAG;
	SetPagePackSkipped(1);
	return(4); //Error - Number of writes exceeds page size
	}

	pmOffset = pmOffset + nextLoc;

	WritePMLow(data, pmOffset);
	WritePMHigh((addr % DATA_EE_SIZE), pmOffset);

	UnlockWrite();

	Nop();
	Nop();

	latch = (ReadPMLow(pmOffset) & 0xFF);

	if(latch != (data & 0xFF))
	{
	TBLPAG = savedTBLPAG;
	SetPageWriteError(1);
	return(7); //Error - RAM does not match PM
	}

	latch = (ReadPMHigh(pmOffset) & 0xFF);

	if(latch != (addr % DATA_EE_SIZE))
	{
	TBLPAG = savedTBLPAG;
	SetPageWriteError(1);
	return(7); //Error - RAM does not match PM
	}

	pmOffset += 1;
	latch = ((ReadPMLow(pmOffset) >> 8) & 0xFF);

	if(latch != ((data >> 8) & 0xFF))
	{
	TBLPAG = savedTBLPAG;
	SetPageWriteError(1);
	return(7); //Error - RAM does not match PM
	}

	//Pack if page is full
	if ((nextLoc + 2) == ((NUMBER_OF_INSTRUCTIONS_IN_PAGE) * 2))
	{
	PackEE(bank);
	}

	TBLPAG = savedTBLPAG;

	return(0);
	}

DEE_Emulation_16-bit.cNo OneTemporaryActions

File Metadata

DEE_Emulation_16-bit.cView Options

Event Timeline

DEE_Emulation_16-bit.c
No OneTemporary
Actions

DEE_Emulation_16-bit.c
View Options