(NOTE)Information on the BIOP Lattice 7
# Mouting slides
WARNING: Avoid using FluoromountG! **TODO: Explain reason**
# Available Resources
# [[ https://drive.google.com/file/d/1BHH2bo9R_vXXGbuxR1BpFb2inAR5u30y/view?usp=sharing | Lattice Lightsheet 7 Quick Mounting Guide]] (PDF, ~1MB)
# [[https://github.com/VolkerH/Lattice_Lightsheet_Deskew_Deconv | Lattice Lightsheet Deskew Deconvolution Repo]] (GitHub)
# [[https://github.com/dmilkie/cudaDecon | CUDA Deconvolution Repo]] (GitHub)
# Direct Connection to Lattice Lightsheet 7 Processing computer from Acquisition
| **Local IP Address** | 192.168.96.43 |
| **Login** | .\zeiss |
| **Password** | Z3issZ3iss |
(IMPORTANT) TODO: Transfer TL document to this c4science page: https://docs.google.com/document/d/1erk4H68zqTFlGz2720YhLbSnQkXj7CNb56WDfUXyYSw/edit?usp=sharing
(IMPORTANT) TODO: RETRANSCRIBE Wolf notes: https://docs.google.com/document/d/19DTe09v1zshTjqERQHdmWhRGSw8r6DSRiDubKTuWdzQ/edit
# Error logs for Zeiss
If there was an error during an acquisition, sending the image file may not be enough for Zeiss to solve the issue.
Instead, please follow the procedure below:
* Software log part:
** When Zen is opened: right task bar > right click microscope icon > Maintenance > Create service report
** Look for where the report is saved
* Zen needs to be switched off before the following procedure (Hardware log part):
** C\Zen\CanCheck
** Create Report on the right side (click Yes)
Send both reports, and an example image