Homec4science
Diffusion lammps (lammps-icms) Browse

lammps/doc/html/_sources/fix_nph_asphere.txt
7b8a96ee8ceflammps-icms

Last Change
Raw File

fix_nph_asphere.txt
View Options

.. index:: fix nph/asphere
fix nph/asphere command
=======================
fix nph/asphere/omp command
===========================
Syntax
""""""
.. parsed-literal::
fix ID group-ID nph/asphere args keyword value ...
* ID, group-ID are documented in :doc:`fix <fix>` command
* nph/asphere = style name of this fix command
* additional barostat related keyword/value pairs from the :doc:`fix nph <fix_nh>` command can be appended
Examples
""""""""
.. parsed-literal::
fix 1 all nph/asphere iso 0.0 0.0 1000.0
fix 2 all nph/asphere x 5.0 5.0 1000.0
fix 2 all nph/asphere x 5.0 5.0 1000.0 drag 0.2
fix 2 water nph/asphere aniso 0.0 0.0 1000.0 dilate partial
Description
"""""""""""
Perform constant NPH integration to update position, velocity,
orientation, and angular velocity each timestep for aspherical or
ellipsoidal particles in the group using a Nose/Hoover pressure
barostat. P is pressure; H is enthalpy. This creates a system
trajectory consistent with the isenthalpic ensemble.
This fix differs from the :doc:`fix nph <fix_nh>` command, which assumes
point particles and only updates their position and velocity.
Additional parameters affecting the barostat are specified by keywords
and values documented with the :doc:`fix nph <fix_nh>` command. See,
for example, discussion of the *aniso*\ , and *dilate* keywords.
The particles in the fix group are the only ones whose velocities and
positions are updated by the velocity/position update portion of the
NPH integration.
Regardless of what particles are in the fix group, a global pressure is
computed for all particles. Similarly, when the size of the simulation
box is changed, all particles are re-scaled to new positions, unless the
keyword *dilate* is specified with a value of *partial*\ , in which case
only the particles in the fix group are re-scaled. The latter can be
useful for leaving the coordinates of particles in a solid substrate
unchanged and controlling the pressure of a surrounding fluid.
----------
This fix computes a temperature and pressure each timestep. To do
this, the fix creates its own computes of style "temp/asphere" and
"pressure", as if these commands had been issued:
.. parsed-literal::
compute fix-ID_temp all temp/asphere
compute fix-ID_press all pressure fix-ID_temp
See the :doc:`compute temp/asphere <compute_temp_asphere>` and :doc:`compute pressure <compute_pressure>` commands for details. Note that the
IDs of the new computes are the fix-ID + underscore + "temp" or fix_ID
+ underscore + "press", and the group for the new computes is "all"
since pressure is computed for the entire system.
Note that these are NOT the computes used by thermodynamic output (see
the :doc:`thermo_style <thermo_style>` command) with ID = *thermo_temp*
and *thermo_press*\ . This means you can change the attributes of this
fix's temperature or pressure via the
:doc:`compute_modify <compute_modify>` command or print this temperature
or pressure during thermodynamic output via the :doc:`thermo_style custom <thermo_style>` command using the appropriate compute-ID.
It also means that changing attributes of *thermo_temp* or
*thermo_press* will have no effect on this fix.
----------
Styles with a *gpu*\ , *intel*\ , *kk*\ , *omp*\ , or *opt* suffix are
functionally the same as the corresponding style without the suffix.
They have been optimized to run faster, depending on your available
hardware, as discussed in :doc:`Section_accelerate <Section_accelerate>`
of the manual. The accelerated styles take the same arguments and
should produce the same results, except for round-off and precision
issues.
These accelerated styles are part of the GPU, USER-INTEL, KOKKOS,
USER-OMP and OPT packages, respectively. They are only enabled if
LAMMPS was built with those packages. See the :ref:`Making LAMMPS <start_3>` section for more info.
You can specify the accelerated styles explicitly in your input script
by including their suffix, or you can use the :ref:`-suffix command-line switch <start_7>` when you invoke LAMMPS, or you can
use the :doc:`suffix <suffix>` command in your input script.
See :doc:`Section_accelerate <Section_accelerate>` of the manual for
more instructions on how to use the accelerated styles effectively.
Restart, fix_modify, output, run start/stop, minimize info
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
This fix writes the state of the Nose/Hoover barostat to :doc:`binary restart files <restart>`. See the :doc:`read_restart <read_restart>`
command for info on how to re-specify a fix in an input script that
reads a restart file, so that the operation of the fix continues in an
uninterrupted fashion.
The :doc:`fix_modify <fix_modify>` *temp* and *press* options are
supported by this fix. You can use them to assign a
:doc:`compute <compute>` you have defined to this fix which will be used
in its thermostatting or barostatting procedure. If you do this, note
that the kinetic energy derived from the compute temperature should be
consistent with the virial term computed using all atoms for the
pressure. LAMMPS will warn you if you choose to compute temperature
on a subset of atoms.
The :doc:`fix_modify <fix_modify>` *energy* option is supported by this
fix to add the energy change induced by Nose/Hoover barostatting to
the system's potential energy as part of :doc:`thermodynamic output <thermo_style>`.
This fix computes the same global scalar and global vector of
quantities as does the :doc:`fix nph <fix_nh>` command.
This fix can ramp its target pressure over multiple runs, using the
*start* and *stop* keywords of the :doc:`run <run>` command. See the
:doc:`run <run>` command for details of how to do this.
This fix is not invoked during :doc:`energy minimization <minimize>`.
Restrictions
""""""""""""
This fix is part of the ASPHERE package. It is only enabled if LAMMPS
was built with that package. See the :ref:`Making LAMMPS <start_3>` section for more info.
This fix requires that atoms store torque and angular momementum and a
quaternion as defined by the :doc:`atom_style ellipsoid <atom_style>`
command.
All particles in the group must be finite-size. They cannot be point
particles, but they can be aspherical or spherical as defined by their
shape attribute.
Related commands
""""""""""""""""
:doc:`fix nph <fix_nh>`, :doc:`fix nve_asphere <fix_nve_asphere>`, :doc:`fix nvt_asphere <fix_nvt_asphere>`, :doc:`fix npt_asphere <fix_npt_asphere>`, :doc:`fix_modify <fix_modify>`
**Default:** none
.. _lws: http://lammps.sandia.gov
.. _ld: Manual.html
.. _lc: Section_commands.html#comm
c4science · Help