Diffusion Phabricator (production) Browse

default.conf.php
3aa54782a791production

default.conf.php
View Options

			<?php

			/*
			* Copyright 2012 Facebook, Inc.
			*
			* Licensed under the Apache License, Version 2.0 (the "License");
			* you may not use this file except in compliance with the License.
			* You may obtain a copy of the License at
			*
			* http://www.apache.org/licenses/LICENSE-2.0
			*
			* Unless required by applicable law or agreed to in writing, software
			* distributed under the License is distributed on an "AS IS" BASIS,
			* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
			* See the License for the specific language governing permissions and
			* limitations under the License.
			*/

			return array(

			// The root URI which Phabricator is installed on.
			// Example: "http://phabricator.example.com/"
			'phabricator.base-uri' => null,

			// If you have multiple environments, provide the production environment URI
			// here so that emails, etc., generated in development/sandbox environments
			// contain the right links.
			'phabricator.production-uri' => null,

			// Setting this to 'true' will invoke a special setup mode which helps guide
			// you through setting up Phabricator.
			'phabricator.setup' => false,

			// -- IMPORTANT! Security! -------------------------------------------------- //

			// IMPORTANT: By default, Phabricator serves files from the same domain the
			// application lives on. This is convenient but not secure: it creates a large
			// class of vulnerabilities which can not be generally mitigated.
			//
			// To avoid this, you should configure a second domain in the same way you
			// have the primary domain configured (e.g., point it at the same machine and
			// set up the same vhost rules) and provide it here. For instance, if your
			// primary install is on "http://www.phabricator-example.com/", you could
			// configure "http://www.phabricator-files.com/" and specify the entire
			// domain (with protocol) here. This will enforce that files are
			// served only from the alternate domain. Ideally, you should use a
			// completely separate domain name rather than just a different subdomain.
			//
			// It is STRONGLY RECOMMENDED that you configure this. Your install is NOT
			// SECURE unless you do so.
			'security.alternate-file-domain' => null,

			// Default key for HMAC digests where the key is not important (i.e., the
			// hash itself is secret). You can change this if you want (to any other
			// string), but doing so will break existing sessions and CSRF tokens.
			'security.hmac-key' => '[D\t~Y7eNmnQGJ;rnH6aF;m2!vJ8@v8C=Cs:aQS\.Qw',


			// -- Internationalization -------------------------------------------------- //

			// This allows customizing texts used in Phabricator. The class must extend
			// PhabricatorTranslation.
			'translation.provider' => 'PhabricatorEnglishTranslation',

			// You can use 'translation.override' if you don't want to create a full
			// translation to give users an option for switching to it and you just want
			// to override some strings in the default translation.
			'translation.override' => array(),


			// -- Access Policies ------------------------------------------------------- //

			// Phabricator allows you to set the visibility of objects (like repositories
			// and source code) to "Public", which means anyone on the internet can see
			// them, even without being logged in. This is great for open source, but
			// some installs may never want to make anything public, so this policy is
			// disabled by default. You can enable it here, which will let you set the
			// policy for objects to "Public". With this option disabled, the most open
			// policy is "All Users", which means users must be logged in to view things.
			'policy.allow-public' => false,


			// -- Logging --------------------------------------------------------------- //

			// To enable the Phabricator access log, specify a path here. The Phabricator
			// access log can provide more detailed information about Phabricator access
			// than normal HTTP access logs (for instance, it can show logged-in users,
			// controllers, and other application data). If not set, no log will be
			// written.
			//
			// Make sure the PHP process can write to the log!
			'log.access.path' => null,

			// Format for the access log. If not set, the default format will be used:
			//
			// "[%D]\t%h\t%u\t%M\t%C\t%m\t%U\t%c\t%T"
			//
			// Available variables are:
			//
			// - %c The HTTP response code.
			// - %C The controller which handled the request.
			// - %D The request date.
			// - %e Epoch timestamp.
			// - %h The webserver's host name.
			// - %p The PID of the server process.
			// - %R The HTTP referrer.
			// - %r The remote IP.
			// - %T The request duration, in microseconds.
			// - %U The request path.
			// - %u The logged-in user, if one is logged in.
			// - %M The HTTP method.
			// - %m For conduit, the Conduit method which was invoked.
			//
			// If a variable isn't available (for example, %m appears in the file format
			// but the request is not a Conduit request), it will be rendered as "-".
			//
			// Note that the default format is subject to change in the future, so if you
			// rely on the log's format, specify it explicitly.
			'log.access.format' => null,


			// -- DarkConsole ----------------------------------------------------------- //

			// DarkConsole is a administrative debugging/profiling tool built into
			// Phabricator. You can leave it disabled unless you're developing against
			// Phabricator.

			// Determines whether or not DarkConsole is available. DarkConsole exposes
			// some data like queries and stack traces, so you should be careful about
			// turning it on in production (although users can not normally see it, even
			// if the deployment configuration enables it).
			'darkconsole.enabled' => false,

			// Always enable DarkConsole, even for logged out users. This potentially
			// exposes sensitive information to users, so make sure untrusted users can
			// not access an install running in this mode. You should definitely leave
			// this off in production. It is only really useful for using DarkConsole
			// utilities to debug or profile logged-out pages. You must set
			// 'darkconsole.enabled' to use this option.
			'darkconsole.always-on' => false,


			// Allows you to mask certain configuration values from appearing in the
			// "Config" tab of DarkConsole.
			'darkconsole.config-mask' => array(
			'mysql.pass',
			'amazon-ses.secret-key',
			'amazon-s3.secret-key',
			'sendgrid.api-key',
			'recaptcha.private-key',
			'phabricator.csrf-key',
			'facebook.application-secret',
			'github.application-secret',
			'google.application-secret',
			'phabricator.application-secret',
			'disqus.application-secret',
			'phabricator.mail-key',
			'security.hmac-key',
			),


			// -- MySQL --------------------------------------------------------------- //

			// Class providing database configuration. It must implement
			// DatabaseConfigurationProvider.
			'mysql.configuration-provider' => 'DefaultDatabaseConfigurationProvider',

			// The username to use when connecting to MySQL.
			'mysql.user' => 'root',

			// The password to use when connecting to MySQL.
			'mysql.pass' => '',

			// The MySQL server to connect to. If you want to connect to a different
			// port than the default (which is 3306), specify it in the hostname
			// (e.g., db.example.com:1234).
			'mysql.host' => 'localhost',

			// The number of times to try reconnecting to the MySQL database
			'mysql.connection-retries' => 3,

			// Phabricator supports PHP extensions MySQL and MySQLi. It is possible to
			// implement also other access mechanism (e.g. PDO_MySQL). The class must
			// extend AphrontMySQLDatabaseConnectionBase.
			'mysql.implementation' => 'AphrontMySQLDatabaseConnection',


			// -- Notifications --------------------------------------------------------- //

			'notification.enabled' => false,

			// Client port for the realtime server to listen on, and for realtime clients
			// to connect to. Use "localhost" if you are running the notification server
			// on the same host as the web server.
			'notification.client-uri' => 'http://localhost:22280/',

			// URI and port for the notification root server.
			'notification.server-uri' => 'http://localhost:22281/',

			// The server must be started as root so it can bind to privileged ports, but
			// if you specify a user here it will drop permissions after binding.
			'notification.user' => null,

			// Location where the server should log to.
			'notification.log' => '/var/log/aphlict.log',

			// PID file to use.
			'notification.pidfile' => '/var/run/aphlict.pid',

			// Enable this option to get additional debug output in the browser.
			'notification.debug' => false,


			// -- Email ----------------------------------------------------------------- //

			// Some Phabricator tools send email notifications, e.g. when Differential
			// revisions are updated or Maniphest tasks are changed. These options allow
			// you to configure how email is delivered.

			// You can test your mail setup by going to "MetaMTA" in the web interface,
			// clicking "Send New Message", and then composing a message.

			// Default address to send mail "From".
			'metamta.default-address' => 'noreply@example.com',

			// Domain used to generate Message-IDs.
			'metamta.domain' => 'example.com',

			// When a message is sent to multiple recipients (for example, several
			// reviewers on a code review), Phabricator can either deliver one email to
			// everyone (e.g., "To: alincoln, usgrant, htaft") or separate emails to each
			// user (e.g., "To: alincoln", "To: usgrant", "To: htaft"). The major
			// advantages and disadvantages of each approach are:
			//
			// - One mail to everyone:
			// - Recipients can see To/Cc at a glance.
			// - If you use mailing lists, you won't get duplicate mail if you're
			// a normal recipient and also Cc'd on a mailing list.
			// - Getting threading to work properly is harder, and probably requires
			// making mail less useful by turning off options.
			// - Sometimes people will "Reply All" and everyone will get two mails,
			// one from the user and one from Phabricator turning their mail into
			// a comment.
			// - Not supported with a private reply-to address.
			// - Mails are sent in the server default translation.
			// - One mail to each user:
			// - Recipients need to look in the mail body to see To/Cc.
			// - If you use mailing lists, recipients may sometimes get duplicate
			// mail.
			// - Getting threading to work properly is easier, and threading settings
			// can be customzied by each user.
			// - "Reply All" no longer spams all other users.
			// - Required if private reply-to addresses are configured.
			// - Mails are sent in the language of user preference.
			//
			// In the code, splitting one outbound email into one-per-recipient is
			// sometimes referred to as "multiplexing".
			'metamta.one-mail-per-recipient' => true,

			// When sending a message that has no To recipient (i.e. all recipients
			// are CC'd, for example when multiplexing mail), set the To field to the
			// following value. If no value is set, messages with no To will have
			// their CCs upgraded to To.
			'metamta.placeholder-to-recipient' => null,

			// When a user takes an action which generates an email notification (like
			// commenting on a Differential revision), Phabricator can either send that
			// mail "From" the user's email address (like "alincoln@logcabin.com") or
			// "From" the 'metamta.default-address' address. The user experience is
			// generally better if Phabricator uses the user's real address as the "From"
			// since the messages are easier to organize when they appear in mail clients,
			// but this will only work if the server is authorized to send email on behalf
			// of the "From" domain. Practically, this means:
			// - If you are doing an install for Example Corp and all the users will
			// have corporate @corp.example.com addresses and any hosts Phabricator
			// is running on are authorized to send email from corp.example.com,
			// you can enable this to make the user experience a little better.
			// - If you are doing an install for an open source project and your
			// users will be registering via Facebook and using personal email
			// addresses, you MUST NOT enable this or virtually all of your outgoing
			// email will vanish into SFP blackholes.
			// - If your install is anything else, you're much safer leaving this
			// off since the risk in turning it on is that your outgoing mail will
			// mostly never arrive.
			'metamta.can-send-as-user' => false,


			// Adapter class to use to transmit mail to the MTA. The default uses
			// PHPMailerLite, which will invoke "sendmail". This is appropriate
			// if sendmail actually works on your host, but if you haven't configured mail
			// it may not be so great. You can also use Amazon SES, by changing this to
			// 'PhabricatorMailImplementationAmazonSESAdapter', signing up for SES, and
			// filling in your 'amazon-ses.access-key' and 'amazon-ses.secret-key' below.
			'metamta.mail-adapter' =>
			'PhabricatorMailImplementationPHPMailerLiteAdapter',

			// When email is sent, try to hand it off to the MTA immediately instead of
			// queueing it for delivery by the daemons. If you are running the Phabricator
			// daemons with "phd start", you should disable this to provide a (sometimes
			// substantial) performance boost. It's on by default to make setup and
			// configuration a little easier.
			'metamta.send-immediately' => true,

			// If you're using Amazon SES to send email, provide your AWS access key
			// and AWS secret key here. To set up Amazon SES with Phabricator, you need
			// to:
			// - Make sure 'metamta.mail-adapter' is set to:
			// "PhabricatorMailImplementationAmazonSESAdapter"
			// - Make sure 'metamta.can-send-as-user' is false.
			// - Make sure 'metamta.default-address' is configured to something sensible.
			// - Make sure 'metamta.default-address' is a validated SES "From" address.
			'amazon-ses.access-key' => null,
			'amazon-ses.secret-key' => null,

			// If you're using Sendgrid to send email, provide your access credentials
			// here. This will use the REST API. You can also use Sendgrid as a normal
			// SMTP service.
			'sendgrid.api-user' => null,
			'sendgrid.api-key' => null,

			// You can configure a reply handler domain so that email sent from Maniphest
			// will have a special "Reply To" address like "T123+82+af19f@example.com"
			// that allows recipients to reply by email and interact with tasks. For
			// instructions on configurating reply handlers, see the article
			// "Configuring Inbound Email" in the Phabricator documentation. By default,
			// this is set to 'null' and Phabricator will use a generic 'noreply@' address
			// or the address of the acting user instead of a special reply handler
			// address (see 'metamta.default-address'). If you set a domain here,
			// Phabricator will begin generating private reply handler addresses. See
			// also 'metamta.maniphest.reply-handler' to further configure behavior.
			// This key should be set to the domain part after the @, like "example.com".
			'metamta.maniphest.reply-handler-domain' => null,

			// You can follow the instructions in "Configuring Inbound Email" in the
			// Phabricator documentation and set 'metamta.maniphest.reply-handler-domain'
			// to support updating Maniphest tasks by email. If you want more advanced
			// customization than this provides, you can override the reply handler
			// class with an implementation of your own. This will allow you to do things
			// like have a single public reply handler or change how private reply
			// handlers are generated and validated.
			// This key should be set to a loadable subclass of
			// PhabricatorMailReplyHandler (and possibly of ManiphestReplyHandler).
			'metamta.maniphest.reply-handler' => 'ManiphestReplyHandler',

			// If you don't want phabricator to take up an entire domain
			// (or subdomain for that matter), you can use this and set a common
			// prefix for mail sent by phabricator. It will make use of the fact that
			// a mail-address such as phabricator+D123+1hjk213h@example.com will be
			// delivered to the phabricator users mailbox.
			// Set this to the left part of the email address and it well get
			// prepended to all outgoing mail. If you want to use e.g.
			// 'phabricator@example.com' this should be set to 'phabricator'.
			'metamta.single-reply-handler-prefix' => null,

			// Prefix prepended to mail sent by Maniphest. You can change this to
			// distinguish between testing and development installs, for example.
			'metamta.maniphest.subject-prefix' => '[Maniphest]',

			// See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
			// but allows email replies via Differential.
			'metamta.differential.reply-handler-domain' => null,

			// See 'metamta.maniphest.reply-handler'. This does the same thing, but
			// affects Differential.
			'metamta.differential.reply-handler' => 'DifferentialReplyHandler',

			// Prefix prepended to mail sent by Differential.
			'metamta.differential.subject-prefix' => '[Differential]',

			// Set this to true if you want patches to be attached to mail from
			// Differential. This won't work if you are using SendGrid as your mail
			// adapter.
			'metamta.differential.attach-patches' => false,

			// To include patches in email bodies, set this to a positive integer. Patches
			// will be inlined if they are at most that many lines. For instance, a value
			// of 100 means "inline patches if they are no longer than 100 lines". By
			// default, patches are not inlined.
			'metamta.differential.inline-patches' => 0,

			// If you enable either of the options above, you can choose what format
			// patches are sent in. Valid options are 'unified' (like diff -u) or 'git'.
			'metamta.differential.patch-format' => 'unified',

			// Enables a different format for comments in differential emails.
			// Differential will create unified diffs around the comment, which
			// will give enough context for people who are only viewing the
			// reviews in email to understand what is going on. The context will
			// be created based on the range of the comment.
			'metamta.differential.unified-comment-context' => false,

			// Prefix prepended to mail sent by Diffusion.
			'metamta.diffusion.subject-prefix' => '[Diffusion]',

			// See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
			// but allows email replies via Diffusion.
			'metamta.diffusion.reply-handler-domain' => null,

			// See 'metamta.maniphest.reply-handler'. This does the same thing, but
			// affects Diffusion.
			'metamta.diffusion.reply-handler' => 'PhabricatorAuditReplyHandler',

			// Set this to true if you want patches to be attached to commit notifications
			// from Diffusion. This won't work with SendGrid.
			'metamta.diffusion.attach-patches' => false,

			// To include patches in Diffusion email bodies, set this to a positive
			// integer. Patches will be inlined if they are at most that many lines.
			// By default, patches are not inlined.
			'metamta.diffusion.inline-patches' => 0,

			// If you've enabled attached patches or inline patches for commit emails, you
			// can establish a hard byte limit on their size. You should generally set
			// reasonable byte and time limits (defaults are 1MB and 60 seconds) to avoid
			// sending ridiculously enormous email for changes like "importing an external
			// library" or "accidentally committed this full-length movie as text".
			'metamta.diffusion.byte-limit' => 1024 * 1024,

			// If you've enabled attached patches or inline patches for commit emails, you
			// can establish a hard time limit on generating them.
			'metamta.diffusion.time-limit' => 60,

			// Prefix prepended to mail sent by Package.
			'metamta.package.subject-prefix' => '[Package]',

			// See 'metamta.maniphest.reply-handler'. This does similar thing for package
			// except that it only supports sending out mail and doesn't handle incoming
			// email.
			'metamta.package.reply-handler' => 'OwnersPackageReplyHandler',

			// By default, Phabricator generates unique reply-to addresses and sends a
			// separate email to each recipient when you enable reply handling. This is
			// more secure than using "From" to establish user identity, but can mean
			// users may receive multiple emails when they are on mailing lists. Instead,
			// you can use a single, non-unique reply to address and authenticate users
			// based on the "From" address by setting this to 'true'. This trades away
			// a little bit of security for convenience, but it's reasonable in many
			// installs. Object interactions are still protected using hashes in the
			// single public email address, so objects can not be replied to blindly.
			'metamta.public-replies' => false,

			// You can configure an email address like "bugs@phabricator.example.com"
			// which will automatically create Maniphest tasks when users send email
			// to it. This relies on the "From" address to authenticate users, so it is
			// is not completely secure. To set this up, enter a complete email
			// address like "bugs@phabricator.example.com" and then configure mail to
			// that address so it routed to Phabricator (if you've already configured
			// reply handlers, you're probably already done). See "Configuring Inbound
			// Email" in the documentation for more information.
			'metamta.maniphest.public-create-email' => null,

			// If you enable 'metamta.public-replies', Phabricator uses "From" to
			// authenticate users. You can additionally enable this setting to try to
			// authenticate with 'Reply-To'. Note that this is completely spoofable and
			// insecure (any user can set any 'Reply-To' address) but depending on the
			// nature of your install or other deliverability conditions this might be
			// okay. Generally, you can't do much more by spoofing Reply-To than be
			// annoying (you can write but not read content). But, you know, this is
			// still COMPLETELY INSECURE.
			'metamta.insecure-auth-with-reply-to' => false,

			// If you enable 'metamta.maniphest.public-create-email' and create an
			// email address like "bugs@phabricator.example.com", it will default to
			// rejecting mail which doesn't come from a known user. However, you might
			// want to let anyone send email to this address; to do so, set a default
			// author here (a Phabricator username). A typical use of this might be to
			// create a "System Agent" user called "bugs" and use that name here. If you
			// specify a valid username, mail will always be accepted and used to create
			// a task, even if the sender is not a system user. The original email
			// address will be stored in an 'From Email' field on the task.
			'metamta.maniphest.default-public-author' => null,

			// You can disable the Herald hints in email if users prefer smaller messages.
			// These are the links under the headers "MANAGE HERALD RULES" and
			// "WHY DID I GET THIS EMAIL?". If you set this to true, they will not appear
			// in any mail. Users can still navigate to the links via the web interface.
			'metamta.herald.show-hints' => true,

			// You can disable the hints under "REPLY HANDLER ACTIONS" if users prefer
			// smaller messages. The actions themselves will still work properly.
			'metamta.reply.show-hints' => true,

			// You can disable the "To:" and "Cc:" footers in mail if users prefer
			// smaller messages.
			'metamta.recipients.show-hints' => true,

			// If this option is enabled, Phabricator will add a "Precedence: bulk"
			// header to transactional mail (e.g., Differential, Maniphest and Herald
			// notifications). This may improve the behavior of some auto-responder
			// software and prevent it from replying. However, it may also cause
			// deliverability issues -- notably, you currently can not send this header
			// via Amazon SES, and enabling this option with SES will prevent delivery
			// of any affected mail.
			'metamta.precedence-bulk' => false,

			// Mail.app on OS X Lion won't respect threading headers unless the subject
			// is prefixed with "Re:". If you enable this option, Phabricator will add
			// "Re:" to the subject line of all mail which is expected to thread. If
			// you've set 'metamta.one-mail-per-recipient', users can override this
			// setting in their preferences.
			'metamta.re-prefix' => false,

			// If true, allow MetaMTA to change mail subjects to put text like
			// '[Accepted]' and '[Commented]' in them. This makes subjects more useful,
			// but might break threading on some clients. If you've set
			// 'metamta.one-mail-per-recipient', users can override this setting in their
			// preferences.
			'metamta.vary-subjects' => true,


			// -- Auth ------------------------------------------------------------------ //

			// Can users login with a username/password, or by following the link from
			// a password reset email? You can disable this and configure one or more
			// OAuth providers instead.
			'auth.password-auth-enabled' => true,

			// Maximum number of simultaneous web sessions each user is permitted to have.
			// Setting this to "1" will prevent a user from logging in on more than one
			// browser at the same time.
			'auth.sessions.web' => 5,

			// Maximum number of simultaneous Conduit sessions each user is permitted
			// to have.
			'auth.sessions.conduit' => 5,

			// Set this true to enable the Settings -> SSH Public Keys panel, which will
			// allow users to associated SSH public keys with their accounts. This is only
			// really useful if you're setting up services over SSH and want to use
			// Phabricator for authentication; in most situations you can leave this
			// disabled.
			'auth.sshkeys.enabled' => false,

			// If true, email addresses must be verified (by clicking a link in an
			// email) before a user can login. By default, verification is optional
			// unless 'auth.email-domains' is nonempty (see below).
			'auth.require-email-verification' => false,

			// You can restrict allowed email addresses to certain domains (like
			// "yourcompany.com") by setting a list of allowed domains here. Users will
			// only be allowed to register using email addresses at one of the domains,
			// and will only be able to add new email addresses for these domains. If
			// you configure this, it implies 'auth.require-email-verification'.
			//
			// To configure email domains, set a list of domains like this:
			//
			// array(
			// 'yourcompany.com',
			// 'yourcompany.co.uk',
			// )
			//
			// You should omit the "@" from domains. Note that the domain must match
			// exactly. If you allow "yourcompany.com", that permits "joe@yourcompany.com"
			// but rejects "joe@mail.yourcompany.com".
			'auth.email-domains' => array(),

			// You can provide an arbitrary block of HTML here, which will appear on the
			// login screen. Normally, you'd use this to provide login or registration
			// instructions to users.
			'auth.login-message' => null,


			// -- Accounts -------------------------------------------------------------- //

			// Is basic account information (email, real name, profile picture) editable?
			// If you set up Phabricator to automatically synchronize account information
			// from some other authoritative system, you can disable this to ensure
			// information remains consistent across both systems.
			'account.editable' => true,

			// When users set or reset a password, it must have at least this many
			// characters.
			'account.minimum-password-length' => 8,


			// -- Facebook OAuth -------------------------------------------------------- //

			// Can users use Facebook credentials to login to Phabricator?
			'facebook.auth-enabled' => false,

			// Can users use Facebook credentials to create new Phabricator accounts?
			'facebook.registration-enabled' => true,

			// Are Facebook accounts permanently linked to Phabricator accounts, or can
			// the user unlink them?
			'facebook.auth-permanent' => false,

			// The Facebook "Application ID" to use for Facebook API access.
			'facebook.application-id' => null,

			// The Facebook "Application Secret" to use for Facebook API access.
			'facebook.application-secret' => null,

			// Should Phabricator reject requests made by users with
			// Secure Browsing disabled?
			'facebook.require-https-auth' => false,

			// -- GitHub OAuth ---------------------------------------------------------- //

			// Can users use GitHub credentials to login to Phabricator?
			'github.auth-enabled' => false,

			// Can users use GitHub credentials to create new Phabricator accounts?
			'github.registration-enabled' => true,

			// Are GitHub accounts permanently linked to Phabricator accounts, or can
			// the user unlink them?
			'github.auth-permanent' => false,

			// The GitHub "Client ID" to use for GitHub API access.
			'github.application-id' => null,

			// The GitHub "Secret" to use for GitHub API access.
			'github.application-secret' => null,


			// -- Google OAuth ---------------------------------------------------------- //

			// Can users use Google credentials to login to Phabricator?
			'google.auth-enabled' => false,

			// Can users use Google credentials to create new Phabricator accounts?
			'google.registration-enabled' => true,

			// Are Google accounts permanently linked to Phabricator accounts, or can
			// the user unlink them?
			'google.auth-permanent' => false,

			// The Google "Client ID" to use for Google API access.
			'google.application-id' => null,

			// The Google "Client Secret" to use for Google API access.
			'google.application-secret' => null,

			// -- LDAP Auth ----------------------------------------------------- //
			// Enable ldap auth
			'ldap.auth-enabled' => false,

			// The LDAP server hostname
			'ldap.hostname' => '',

			// The LDAP server port
			'ldap.port' => 389,

			// The LDAP base domain name
			'ldap.base_dn' => '',

			// The attribute to be regarded as 'username'. Has to be unique
			'ldap.search_attribute' => '',

			// Perform a search to find a user
			// Many LDAP installations do not have the username in the dn, if this is
			// true for you set this to true and configure the username_attribute below
			'ldap.search-first' => false,

			// The attribute to search for if you have to search for a user
			'ldap.username-attribute' => '',

			// The attribute(s) to be regarded as 'real name'.
			// If more then one attribute is supplied the values of the attributes in
			// the array will be joined
			'ldap.real_name_attributes' => array(),

			// A domain name to use when authenticating against Active Directory
			// (e.g. 'example.com')
			'ldap.activedirectory_domain' => '',

			// The LDAP version
			'ldap.version' => 3,

			// LDAP Referrals Option
			// Whether referrals should be followed by the client
			// Should be set to 0 if you use Windows 2003 AD
			'ldap.referrals' => 1,

			// -- Disqus OAuth ---------------------------------------------------------- //

			// Can users use Disqus credentials to login to Phabricator?
			'disqus.auth-enabled' => false,

			// Can users use Disqus credentials to create new Phabricator accounts?
			'disqus.registration-enabled' => true,

			// Are Disqus accounts permanently linked to Phabricator accounts, or can
			// the user unlink them?
			'disqus.auth-permanent' => false,

			// The Disqus "Client ID" to use for Disqus API access.
			'disqus.application-id' => null,

			// The Disqus "Client Secret" to use for Disqus API access.
			'disqus.application-secret' => null,


			// -- Phabricator OAuth ----------------------------------------------------- //

			// Meta-town -- Phabricator is itself an OAuth Provider
			// TODO -- T887 -- make this support multiple Phabricator instances!

			// The URI of the Phabricator instance to use as an OAuth server.
			'phabricator.oauth-uri' => null,

			// Can users use Phabricator credentials to login to Phabricator?
			'phabricator.auth-enabled' => false,

			// Can users use Phabricator credentials to create new Phabricator accounts?
			'phabricator.registration-enabled' => true,

			// Are Phabricator accounts permanently linked to Phabricator accounts, or can
			// the user unlink them?
			'phabricator.auth-permanent' => false,

			// The Phabricator "Client ID" to use for Phabricator API access.
			'phabricator.application-id' => null,

			// The Phabricator "Client Secret" to use for Phabricator API access.
			'phabricator.application-secret' => null,

			// -- Disqus Comments ------------------------------------------------------- //

			// Should Phame users have Disqus comment widget, and if so what's the
			// website shortname to use? For example, secure.phabricator.org uses
			// "phabricator", which we registered with Disqus. If you aren't familiar
			// with Disqus, see:
			// Disqus quick start guide - http://docs.disqus.com/help/4/
			// Information on shortnames - http://docs.disqus.com/help/68/
			'disqus.shortname' => null,

			// -- Recaptcha ------------------------------------------------------------- //

			// Is Recaptcha enabled? If disabled, captchas will not appear. You should
			// enable Recaptcha if your install is public-facing, as it hinders
			// brute-force attacks.
			'recaptcha.enabled' => false,

			// Your Recaptcha public key, obtained from Recaptcha.
			'recaptcha.public-key' => null,

			// Your Recaptcha private key, obtained from Recaptcha.
			'recaptcha.private-key' => null,


			// -- Misc ------------------------------------------------------------------ //

			// This is hashed with other inputs to generate CSRF tokens. If you want, you
			// can change it to some other string which is unique to your install. This
			// will make your install more secure in a vague, mostly theoretical way. But
			// it will take you like 3 seconds of mashing on your keyboard to set it up so
			// you might as well.
			'phabricator.csrf-key' => '0b7ec0592e0a2829d8b71df2fa269b2c6172eca3',

			// This is hashed with other inputs to generate mail tokens. If you want, you
			// can change it to some other string which is unique to your install. In
			// particular, you will want to do this if you accidentally send a bunch of
			// mail somewhere you shouldn't have, to invalidate all old reply-to
			// addresses.
			'phabricator.mail-key' => '5ce3e7e8787f6e40dfae861da315a5cdf1018f12',

			// Version string displayed in the footer. You can generate this value from
			// Git log or from the current date in the deploy with a script like this:
			//
			// git log -n1 --pretty=%h > version.txt
			//
			// You can then use this generated value like this:
			//
			// 'phabricator.version' =>
			// file_get_contents(dirname(__FILE__).'/version.txt'),
			'phabricator.version' => 'UNSTABLE',

			// PHP requires that you set a timezone in your php.ini before using date
			// functions, or it will emit a warning. If this isn't possible (for instance,
			// because you are using HPHP) you can set some valid constant for
			// date_default_timezone_set() here and Phabricator will set it on your
			// behalf, silencing the warning.
			'phabricator.timezone' => null,

			// When unhandled exceptions occur, stack traces are hidden by default.
			// You can enable traces for development to make it easier to debug problems.
			'phabricator.show-stack-traces' => false,

			// Shows an error callout if a page generated PHP errors, warnings or notices.
			// This makes it harder to miss problems while developing Phabricator.
			'phabricator.show-error-callout' => false,

			// When users write comments which have URIs, they'll be automatically linked
			// if the protocol appears in this set. This whitelist is primarily to prevent
			// security issues like javascript:// URIs.
			'uri.allowed-protocols' => array(
			'http' => true,
			'https' => true,
			),

			// Tokenizers are UI controls which let the user select other users, email
			// addresses, project names, etc., by typing the first few letters and having
			// the control autocomplete from a list. They can load their data in two ways:
			// either in a big chunk up front, or as the user types. By default, the data
			// is loaded in a big chunk. This is simpler and performs better for small
			// datasets. However, if you have a very large number of users or projects,
			// (in the ballpark of more than a thousand), loading all that data may become
			// slow enough that it's worthwhile to query on demand instead. This makes
			// the typeahead slightly less responsive but overall performance will be much
			// better if you have a ton of stuff. You can figure out which setting is
			// best for your install by changing this setting and then playing with a
			// user tokenizer (like the user selectors in Maniphest or Differential) and
			// seeing which setting loads faster and feels better.
			'tokenizer.ondemand' => false,

			// By default, Phabricator includes some silly nonsense in the UI, such as
			// a submit button called "Clowncopterize" in Differential and a call to
			// "Leap Into Action". If you'd prefer more traditional UI strings like
			// "Submit", you can set this flag to disable most of the jokes and easter
			// eggs.
			'phabricator.serious-business' => false,


			// -- Files ----------------------------------------------------------------- //

			// Lists which uploaded file types may be viewed in the browser. If a file
			// has a mime type which does not appear in this list, it will always be
			// downloaded instead of displayed. This is mainly a usability
			// consideration, since browsers tend to freak out when viewing enormous
			// binary files.
			//
			// The keys in this array are viewable mime types; the values are the mime
			// types they will be delivered as when they are viewed in the browser.
			//
			// IMPORTANT: Configure 'security.alternate-file-domain' above! Your install
			// is NOT safe if it is left unconfigured.
			'files.viewable-mime-types' => array(
			'image/jpeg' => 'image/jpeg',
			'image/jpg' => 'image/jpg',
			'image/png' => 'image/png',
			'image/gif' => 'image/gif',
			'text/plain' => 'text/plain; charset=utf-8',
			'text/x-diff' => 'text/plain; charset=utf-8',

			// ".ico" favicon files, which have mime type diversity. See:
			// http://en.wikipedia.org/wiki/ICO_(file_format)#MIME_type
			'image/x-ico' => 'image/x-icon',
			'image/x-icon' => 'image/x-icon',
			'image/vnd.microsoft.icon' => 'image/x-icon',
			),

			// List of mime types which can be used as the source for an <img /> tag.
			// This should be a subset of 'files.viewable-mime-types' and exclude files
			// like text.
			'files.image-mime-types' => array(
			'image/jpeg' => true,
			'image/jpg' => true,
			'image/png' => true,
			'image/gif' => true,
			'image/x-ico' => true,
			'image/x-icon' => true,
			'image/vnd.microsoft.icon' => true,
			),

			// Phabricator can proxy images from other servers so you can paste the URI
			// to a funny picture of a cat into the comment box and have it show up as an
			// image. However, this means the webserver Phabricator is running on will
			// make HTTP requests to arbitrary URIs. If the server has access to internal
			// resources, this could be a security risk. You should only enable it if you
			// are installed entirely a VPN and VPN access is required to access
			// Phabricator, or if the webserver has no special access to anything. If
			// unsure, it is safer to leave this disabled.
			'files.enable-proxy' => false,


			// -- Storage --------------------------------------------------------------- //

			// Phabricator allows users to upload files, and can keep them in various
			// storage engines. This section allows you to configure which engines
			// Phabricator will use, and how it will use them.

			// The largest filesize Phabricator will store in the MySQL BLOB storage
			// engine, which just uses a database table to store files. While this isn't a
			// best practice, it's really easy to set up. Set this to 0 to disable use of
			// the MySQL blob engine.
			'storage.mysql-engine.max-size' => 1000000,

			// Phabricator provides a local disk storage engine, which just writes files
			// to some directory on local disk. The webserver must have read/write
			// permissions on this directory. This is straightforward and suitable for
			// most installs, but will not scale past one web frontend unless the path
			// is actually an NFS mount, since you'll end up with some of the files
			// written to each web frontend and no way for them to share. To use the
			// local disk storage engine, specify the path to a directory here. To
			// disable it, specify null.
			'storage.local-disk.path' => null,

			// If you want to store files in Amazon S3, specify an AWS access and secret
			// key here and a bucket name below.
			'amazon-s3.access-key' => null,
			'amazon-s3.secret-key' => null,

			// Set this to a valid Amazon S3 bucket to store files there. You must also
			// configure S3 access keys above.
			'storage.s3.bucket' => null,

			// Phabricator uses a storage engine selector to choose which storage engine
			// to use when writing file data. If you add new storage engines or want to
			// provide very custom rules (e.g., write images to one storage engine and
			// other files to a different one), you can provide an alternate
			// implementation here. The default engine will use choose MySQL, Local Disk,
			// and S3, in that order, if they have valid configurations above and a file
			// fits within configured limits.
			'storage.engine-selector' => 'PhabricatorDefaultFileStorageEngineSelector',

			// Set the size of the largest file a user may upload. This is used to render
			// text like "Maximum file size: 10MB" on interfaces where users can upload
			// files, and files larger than this size will be rejected.
			//
			// Specify this limit in bytes, or using a "K", "M", or "G" suffix.
			//
			// NOTE: Setting this to a large size is NOT sufficient to allow users to
			// upload large files. You must also configure a number of other settings. To
			// configure file upload limits, consult the article "Configuring File Upload
			// Limits" in the documentation. Once you've configured some limit across all
			// levels of the server, you can set this limit to an appropriate value and
			// the UI will then reflect the actual configured limit.
			'storage.upload-size-limit' => null,

			// Phabricator puts databases in a namespace, which defualts to "phabricator"
			// -- for instance, the Differential database is named
			// "phabricator_differential" by default. You can change this namespace if you
			// want. Normally, you should not do this unless you are developing
			// Phabricator and using namespaces to separate multiple sandbox datasets.
			'storage.default-namespace' => 'phabricator',


			// -- Search ---------------------------------------------------------------- //

			// Phabricator supports Elastic Search; to use it, specify a host like
			// 'http://elastic.example.com:9200/' here.
			'search.elastic.host' => null,

			// Phabricator uses a search engine selector to choose which search engine
			// to use when indexing and reconstructing documents, and when executing
			// queries. You can override the engine selector to provide a new selector
			// class which can select some custom engine you implement, if you want to
			// store your documents in some search engine which does not have default
			// support.
			'search.engine-selector' => 'PhabricatorDefaultSearchEngineSelector',


			// -- Differential ---------------------------------------------------------- //

			'differential.revision-custom-detail-renderer' => null,

			// Array for custom remarkup rules. The array should have a list of
			// class names of classes that extend PhutilRemarkupRule
			'differential.custom-remarkup-rules' => null,

			// Array for custom remarkup block rules. The array should have a list of
			// class names of classes that extend PhutilRemarkupEngineBlockRule
			'differential.custom-remarkup-block-rules' => null,

			// Set display word-wrap widths for Differential. Specify a dictionary of
			// regular expressions mapping to column widths. The filename will be matched
			// against each regexp in order until one matches. The default configuration
			// uses a width of 100 for Java and 80 for other languages. Note that 80 is
			// the greatest column width of all time. Changes here will not be immediately
			// reflected in old revisions unless you purge the changeset render cache
			// (with `./scripts/util/purge_cache.php --changesets`).
			'differential.wordwrap' => array(
			'/\.java$/' => 100,
			'/.*/' => 80,
			),

			// List of file regexps where whitespace is meaningful and should not
			// use 'ignore-all' by default
			'differential.whitespace-matters' => array(
			'/\.py$/',
			'/\.l?hs$/',
			),

			'differential.field-selector' => 'DifferentialDefaultFieldSelector',

			// Differential can show "Host" and "Path" fields on revisions, with
			// information about the machine and working directory where the
			// change came from. These fields are disabled by default because they may
			// occasionally have sensitive information; you can set this to true to
			// enable them.
			'differential.show-host-field' => false,

			// Differential has a required "Test Plan" field by default, which requires
			// authors to fill out information about how they verified the correctness of
			// their changes when sending code for review. If you'd prefer not to use
			// this field, you can disable it here. You can also make it optional
			// (instead of required) below.
			'differential.show-test-plan-field' => true,

			// Differential has a required "Test Plan" field by default. You can make it
			// optional by setting this to false. You can also completely remove it above,
			// if you prefer.
			'differential.require-test-plan-field' => true,

			// If you set this to true, users can "!accept" revisions via email (normally,
			// they can take other actions but can not "!accept"). This action is disabled
			// by default because email authentication can be configured to be very weak,
			// and, socially, email "!accept" is kind of sketchy and implies revisions may
			// not actually be receiving thorough review.
			'differential.enable-email-accept' => false,

			// If you set this to true, users won't need to login to view differential
			// revisions. Anonymous users will have read-only access and won't be able to
			// interact with the revisions.
			'differential.anonymous-access' => false,

			// List of file regexps that should be treated as if they are generated by
			// an automatic process, and thus get hidden by default in differential.
			'differential.generated-paths' => array(
			// '/config\.h$/',
			// '#/autobuilt/#',
			),

			// If you set this to true, users can accept their own revisions. This action
			// is disabled by default because it's most likely not a behavior you want,
			// but it proves useful if you are working alone on a project and want to make
			// use of all of differential's features.
			'differential.allow-self-accept' => false,

			// If you set this to true, any user can close any revision so long as it has
			// been accepted. This can be useful depending on your development model. For
			// example, github-style pull requests where the reviewer is often the
			// actual committer can benefit from turning this option to true. If false,
			// only the submitter can close a revision.
			'differential.always-allow-close' => false,

			// Revisions newer than this number of days are marked as fresh in Action
			// Required and Revisions Waiting on You views. Only work days (not weekends
			// and holidays) are included. Set to 0 to disable this feature.
			'differential.days-fresh' => 1,

			// Similar to 'differential.days-fresh' but marks stale revisions. If the
			// revision is even older than it is marked as old.
			'differential.days-stale' => 3,

			// -- Maniphest ------------------------------------------------------------- //

			'maniphest.enabled' => true,

			// Array of custom fields for Maniphest tasks. For details on adding custom
			// fields to Maniphest, see "Maniphest User Guide: Adding Custom Fields".
			'maniphest.custom-fields' => array(),

			// Class which drives custom field construction. See "Maniphest User Guide:
			// Adding Custom Fields" in the documentation for more information.
			'maniphest.custom-task-extensions-class' => 'ManiphestDefaultTaskExtensions',

			// -- Phriction ------------------------------------------------------------- //

			'phriction.enabled' => true,

			// -- Remarkup -------------------------------------------------------------- //

			// If you enable this, linked YouTube videos will be embeded inline. This has
			// mild security implications (you'll leak referrers to YouTube) and is pretty
			// silly (but sort of awesome).
			'remarkup.enable-embedded-youtube' => false,


			// -- Garbage Collection ---------------------------------------------------- //

			// Phabricator generates various logs and caches in the database which can
			// be garbage collected after a while to make the total data size more
			// manageable. To run garbage collection, launch a
			// PhabricatorGarbageCollector daemon.

			// Since the GC daemon can issue large writes and table scans, you may want to
			// run it only during off hours or make sure it is scheduled so it doesn't
			// overlap with backups. This determines when the daemon can start running
			// each day.
			'gcdaemon.run-at' => '12 AM',

			// How many seconds after 'gcdaemon.run-at' the daemon may collect garbage
			// for. By default it runs continuously, but you can set it to run for a
			// limited period of time. For instance, if you do backups at 3 AM, you might
			// run garbage collection for an hour beforehand. This is not a high-precision
			// limit so you may want to leave some room for the GC to actually stop, and
			// if you set it to something like 3 seconds you're on your own.
			'gcdaemon.run-for' => 24 * 60 * 60,

			// These 'ttl' keys configure how much old data the GC daemon keeps around.
			// Objects older than the ttl will be collected. Set any value to 0 to store
			// data indefinitely.

			'gcdaemon.ttl.herald-transcripts' => 30 * (24 * 60 * 60),
			'gcdaemon.ttl.daemon-logs' => 7 * (24 * 60 * 60),
			'gcdaemon.ttl.differential-parse-cache' => 14 * (24 * 60 * 60),
			'gcdaemon.ttl.markup-cache' => 30 * (24 * 60 * 60),


			// -- Feed ------------------------------------------------------------------ //

			// If you set this to true, you can embed Phabricator activity feeds in other
			// pages using iframes. These feeds are completely public, and a login is not
			// required to view them! This is intended for things like open source
			// projects that want to expose an activity feed on the project homepage.
			//
			// NOTE: You must also set `policy.allow-public` to true for this setting
			// to work properly.
			'feed.public' => false,


			// -- Drydock --------------------------------------------------------------- //

			// If you want to use Drydock's builtin EC2 Blueprints, configure your AWS
			// EC2 credentials here.
			'amazon-ec2.access-key' => null,
			'amazon-ec2.secret-key' => null,


			// -- Customization --------------------------------------------------------- //

			// Paths to additional phutil libraries to load.
			'load-libraries' => array(),

			'aphront.default-application-configuration-class' =>
			'AphrontDefaultApplicationConfiguration',

			'controller.oauth-registration' =>
			'PhabricatorOAuthDefaultRegistrationController',


			// Directory that phd (the Phabricator daemon control script) should use to
			// track running daemons.
			'phd.pid-directory' => '/var/tmp/phd/pid',

			// Directory that the Phabricator daemons should use to store the log file
			'phd.log-directory' => '/var/tmp/phd/log',

			// Number of "TaskMaster" daemons that "phd start" should start. You can
			// raise this if you have a task backlog, or explicitly launch more with
			// "phd launch <N> taskmaster".
			'phd.start-taskmasters' => 4,

			// Launch daemons in "verbose" mode by default. This creates a lot of output,
			// but can help debug issues. Daemons launched in debug mode with "phd debug"
			// are always launched in verbose mode. See also 'phd.trace'.
			'phd.verbose' => false,

			// Launch daemons in "trace" mode by default. This creates an ENORMOUS amount
			// of output, but can help debug issues. Daemons launched in debug mode with
			// "phd debug" are always launched in trace mdoe. See also 'phd.verbose'.
			'phd.trace' => false,

			// Path to custom celerity resource map relative to 'phabricator/src'.
			// See also `scripts/celerity_mapper.php`.
			'celerity.resource-path' => '__celerity_resource_map__.php',

			// This value is an input to the hash function when building resource hashes.
			// It has no security value, but if you accidentally poison user caches (by
			// pushing a bad patch or having something go wrong with a CDN, e.g.) you can
			// change this to something else and rebuild the Celerity map to break user
			// caches. Unless you are doing Celerity development, it is exceptionally
			// unlikely that you need to modify this.
			'celerity.resource-hash' => 'd9455ea150622ee044f7931dabfa52aa',

			// In a development environment, it is desirable to force static resources
			// (CSS and JS) to be read from disk on every request, so that edits to them
			// appear when you reload the page even if you haven't updated the resource
			// maps. This setting ensures requests will be verified against the state on
			// disk. Generally, you should leave this off in production (caching behavior
			// and performance improve with it off) but turn it on in development. (These
			// settings are the defaults.)
			'celerity.force-disk-reads' => false,

			// Minify static resources by removing whitespace and comments. You should
			// enable this in production, but disable it in development.
			'celerity.minify' => false,

			// You can respond to various application events by installing listeners,
			// which will receive callbacks when interesting things occur. Specify a list
			// of classes which extend PhabricatorEventListener here.
			'events.listeners' => array(),

			// -- Syntax Highlighting --------------------------------------------------- //

			// Phabricator can highlight PHP by default and use Pygments for other
			// languages if enabled. You can provide a custom highlighter engine by
			// extending class PhutilSyntaxHighlighterEngine.
			'syntax-highlighter.engine' => 'PhutilDefaultSyntaxHighlighterEngine',

			// If you want syntax highlighting for other languages than PHP then you can
			// install the python package 'Pygments', make sure the 'pygmentize' script is
			// available in the $PATH of the webserver, and then enable this.
			'pygments.enabled' => false,

			// In places that we display a dropdown to syntax-highlight code,
			// this is where that list is defined.
			// Syntax is 'lexer-name' => 'Display Name',
			'pygments.dropdown-choices' => array(
			'apacheconf' => 'Apache Configuration',
			'bash' => 'Bash Scripting',
			'brainfuck' => 'Brainf*ck',
			'c' => 'C',
			'cpp' => 'C++',
			'css' => 'CSS',
			'diff' => 'Diff',
			'django' => 'Django Templating',
			'erb' => 'Embedded Ruby/ERB',
			'erlang' => 'Erlang',
			'html' => 'HTML',
			'java' => 'Java',
			'js' => 'Javascript',
			'mysql' => 'MySQL',
			'perl' => 'Perl',
			'php' => 'PHP',
			'text' => 'Plain Text',
			'python' => 'Python',
			'rainbow' => 'Rainbow',
			'remarkup' => 'Remarkup',
			'ruby' => 'Ruby',
			'xml' => 'XML',
			),

			// This is an override list of regular expressions which allows you to choose
			// what language files are highlighted as. If your projects have certain rules
			// about filenames or use unusual or ambiguous language extensions, you can
			// create a mapping here. This is an ordered dictionary of regular expressions
			// which will be tested against the filename. They should map to either an
			// explicit language as a string value, or a numeric index into the captured
			// groups as an integer.
			'syntax.filemap' => array(
			// Example: Treat all '*.xyz' files as PHP.
			// '@\\.xyz$@' => 'php',

			// Example: Treat 'httpd.conf' as 'apacheconf'.
			// '@/httpd\\.conf$@' => 'apacheconf',

			// Example: Treat all '*.x.bak' file as '.x'. NOTE: we map to capturing
			// group 1 by specifying the mapping as "1".
			// '@\\.([^.]+)\\.bak$@' => 1,

			'@\.arcconfig$@' => 'js',
			'@\.divinerconfig$@' => 'js',
			),

			// Set the default monospaced font style for users who haven't set a custom
			// style.
			'style.monospace' => '10px "Menlo", "Consolas", "Monaco", monospace',


			// -- Debugging ------------------------------------------------------------- //

			// Enable this to change HTTP redirects into normal pages with a link to the
			// redirection target. For example, after you submit a form you'll get a page
			// saying "normally, you'd be redirected...". This is useful to examine
			// service or profiler information on write pathways, or debug redirects. It
			// also makes the UX horrible for normal use, so you should enable it only
			// when debugging.
			//
			// NOTE: This does not currently work for forms with Javascript "workflow",
			// since the redirect happens in Javascript.
			'debug.stop-on-redirect' => false,

			// Enable this to always profile every page. This is very slow! You should
			// only enable it when debugging.
			'debug.profile-every-request' => false,


			// -- Previews ------------------------------------------------------------- //

			// Turn on to enable the "viewport" meta tag. This is a preview feature which
			// will improve the usability of Phabricator on phones and tablets once it
			// is ready.
			'preview.viewport-meta-tag' => false,

			// -- Environment ---------------------------------------------------------- //

			// Phabricator occasionally shells out to other binaries on the server.
			// An example of this is the "pygmentize" command, used to syntax-highlight
			// code written in languages other than PHP. By default, it is assumed that
			// these binaries are in the $PATH of the user running Phabricator (normally
			// 'apache', 'httpd', or 'nobody'). Here you can add extra directories to
			// the $PATH environment variable, for when these binaries are in non-standard
			// locations.
			'environment.append-paths' => array(),
			);

phab/conf/default.conf.php3aa54782a791production

default.conf.phpView Options

phab/conf/default.conf.php
3aa54782a791production

default.conf.php
View Options